Filter
Top Products
4
|
Quick Start Guide
First step
Exit Demonstration Mode
Turn off the demonstration mode
when you use it for the first time after
installation.
1 Press the [ENTER] button to quit
the demonstration mode when the
messages “To Cancel DEMO Press the
ENTER Key” are displayed (approx. 15
seconds).
2 Turn the Control knob to select “YES”,
and then press the [ENTER] button.
The demonstration mode can also be
canceled in the Function setting mode.
Refer to <Function setting> (page 16) of
Instruction manual.
Adjusting the Clock & Date
1 Press the [FNC] button to enter the
Function setting mode.
2 The item can be selected and
determined as follows.
”Settings”
➜ “Clock & Date” ➜ “Clock
Adjust”
To select the item, turn the Control
knob. To determine the item, press the
[ENTER] button.
3 Turn the Control knob to adjust the
hour, and then press the [ENTER] button.
4 Turn the Control knob to adjust the
minute, and then press the [ENTER]
button.
5 Turn the Control knob to select “Date
Adjust”, and then press the [ENTER]
button.
6 Turn the Control knob to adjust the
year, and then press the [ENTER] button.
7 Turn the Control knob to adjust the
month, and then press the [ENTER]
button.
8 Turn the Control knob to adjust the day,
and then press the [ENTER] button.
9 Turn the Control knob to select “Date
Mode”, and then press the [ENTER]
button.
10 Turn the Control knob to select Date
format, and then press the [ENTER]
button.
11 Press the [ ] button for at least 1
second to exit the Function setting
mode.
Control Knob
[FNC]
[ENTER]
[ ]