Filter
Top Products
Troubleshooting Guide / Guide de depannage / Guia
Sobre Localización De Averias / Guia de Diagnóstico
31
What might seem to be a malfunction in your unit may just be the result of slight
misoperation or miswiring. Before calling service, first check the following table
for possible problems.
? Sound skips due to vibration.
✔ The unit is mounted at a slant.
☞ Mount the unit so that is level.
✔ Changer unit is mounted in an unstable place.
☞ Mount the unit in a stable place.
✔ The angle adjustment switches are set improperly.
☞ Set the angle adjustment switches to the correct positions.
? The disc changer mode cannot be selected.
✔ The O-N selection switch of the disc changer is not set properly.
☞ Set the O-N selection switch to "O" position.
? Cannot play an MP3.67
✔ Not conforming to ISO 9660 Level 1/2, Joliet, and Romeo.
☞ Use a medium conforming to ISO 9660 Level 1/2, Joliet, and Romeo.
✔ The MP3 has no or invalid track name extension.68
☞ Add the ".MP3" extension to the MP3 track name.
✔ The media is scratched or dirty.69
☞ Clean the media.
? Noise or no sound generated when an MP3 is played.70
✔ The track has the MP3 track name extension while it is not an MP3.
☞ Do not use the ".MP3" extension in non-MP3.
? Takes time before the unit starts playing MP3.71
✔ The medium contains many albums, tracks, and hierarchical levels.
☞ The unit checks all tracks on the loaded medium first. If the medium has many tracks recorded, it may
take a long time for the unit before it starts playing MP3.
? Fails to play MP3 in the intended order.72
✔ The MP3 tracks were not written by the CD writer in the order in which you wanted them to be played.
☞ Depending on the CD writer, you may be able to set the order in which MP3 tracks are to be played by
writing them onto a medium with their track names beginning with play sequence numbers such as
"01" to "99".
? The sound skips when an MP3 is being played.73-1
✔ The media is scratched or dirty.
☞ Clean the media.
✔ The recording condition is bad.73-2
☞ Record the media again or use another media.
? Can’t enter Folder Search mode.76
✔ There’s no folder recorded in the MP3 media.
☞ Use a media with levels.
? The songs in the selected folder aren’t played in Folder Search mode.77
✔ There are no MP3 in the selected folder.
☞ Make sure there’s recorded content in the MP3 media.
?
The MP3 track search takes time.78
✔ Many tracks are recorded on the media.
☞ When the media directory is complex, the track search can take time.
? The MP3 track time isn’t displayed correctly.80
✔ ---
☞ There are times when it isn’t displayed correctly according to the MP3 recording conditions.
When removing the CD changer, be sure to first eject a magazine then unplug the changer cord. Do not forget to
attach the transport screws before transporting the CD changer.
The CD changer may be damaged during transport if a magazine or CD is left inside it or the transport screws are
not attached.
KDC-CX89/C71(KE)(En,F,Es,P) 02.12.13 5:29 PM Page 31