Filter
Top Products
18
DEUTSCH
ITALIANO
ESPAÑOL
Skip function
Using the 4 key and 3/¢ key, you can skip to the start of the track you want to listen to.
÷ Each time the 3/¢ key is pressed during playback, the
operation will skip to and playback the subsequent track.
÷ When the 4 key is pressed while playback is in
progress, operation will skip to the start of the track cur-
rently being played back, and playback will resume from
there.
÷ Pressing and holding the 4 key or 3/¢ key changes
the displayed track numbers continuously.
÷ The skip function cannot be used during Intro Scan.
3/¢ : Track number increases
4 : Track number decreases
Main unitRemote control
Hold function
When you are operating the unit on a train or when you are carrying it with the power off, this function allows you to
prevent faulty operation due to accidental key operation of the main unit and remote control unit.
÷ Set the HOLD 3 switch on the main unit to engage the
HOLD function for the main unit. (0 PUSH OPEN key
also doesn’t work.)
÷ Set the 2 HOLD switch on the remote control unit to
engage the HOLD function for the remote control unit.
÷ Cancel the HOLD function with the HOLD switch and then
operate the keys. When the HOLD function is engaged,
the unit will not respond to operation of the keys.
Main unitRemote control
*5378_16_24EN 03.7.3, 2:17 PM18