Filter
Top Products
Unit
Remote control
Display (Remote control)
Å PHONE (Phones/Remote) jacks
ı LINE OUT jack
Ç VOL (Volume) knob
Î DBBS
switch
‰ 7 (Stop/Off) key
38 (Play/Pause) key
The keys on the remote control unit with the same names as on the main unit
have the same function as the keys on the main unit.
Part names
Å HOLD switch
ı 38 (Play/Pause) key
4,¢ keys
7 (Stop/Off) key
Ç Headphones jack
Å DBBS indicator
ı Repeat mode indicator
Ç HOLD indicator
Î ASP indicator
‰ Battery duration indicator
Power sources
To the DC IN 4.5V
(External power) jack
AC power
outlet
AC power
adaptor
Using the AC adaptor (For Europe)
1
CAUTION
Use the enclosed AC adaptor (AC-45060A) for this product.
Rechargeable battery operation (For Europe)
2
Note:
Rechargeable batteries are not provided with this unit. Always use the
separately sold rechargeable batteries NB-3A70. Rechargeable bat-
tery models other than the NB-3A70 may be unable to be recharged.
7
Loading the batteries
1 Open the battery cover.
2 Insert 2 or 4 rechargeable batteries and close the cover.
÷ Make sure the positive (+) and negative (-) poles are properly aligned.
÷ When using two batteries, these can be loaded in either battery case.
÷ During battery charging or use of the unit, the battery may become warm.
This is normal and does not indicate a malfunction.
7
Charging the rechargeable batteries
1 Plug in the AC adaptor.
2 Press and hold the 7 key more than 1 seconds. (Main unit only)
3 After the batteries have been charged, remove the AC adaptor.
÷ When using a rechargeable battery which is new or which has not been
used for more than 2 months, the operating period may be shorter than
normal. This is due to the properties of the battery and not a malfunction.
After recharging, use the battery on the unit until it is exhausted. The
original performance of the battery can be recovered by repeating this
cycle a few times.
÷ Make sure to close the top cover of the unit before proceeding to recharging.
÷ Make sure that no alkaline batteries are loaded in the battery cases before
charging the rechargeable batteries.
÷
Recharging completes in about 10 hours. Do not attempt to recharge the
batteries after this period.
÷ Rechargeable batteries can be recharged. When the playable time per
recharge reduces, please newly purchase the optional (NB-3A70) recharge-
able batteries.
When operating the unit with alkaline batteries
3
Note:
Alkaline batteries are not provided with this unit.
1 Open the battery cover.
2 Insert 2 or 4 alkaline batteries and close the cover.
÷ Make sure the positive (+) and negative (-) poles are properly aligned.
÷ When using two batteries, these can be loaded in either battery case.
÷ Use commercially available LR03 batteries. The unit may not operate
normally if manganese batteries are used.
÷ Replace 2 or 4 batteries at the same time.
When operating the unit with 2 rechargeable batteries and 2
alkaline batteries
4
CAUTION
Do not load one rechargeable and one alkaline batteries together in
the same battery case. Otherwise, battery burst or fluid leak may
cause a fire, injury or damage to the battery case and its surroundings.
This unit can be operated with 2 rechargeable batteries and 2 alkaline batteries.
÷ When 4 batteries are used, make sure they are arranged so that batteries of the
same type are in line horizontally (see illustration).
÷ Always use the separately sold rechargeable battery NB-3A70.
÷ Exchange the same type of batteries at the same time.
Rechargeable batteries (NB-3A70)
Alkaline batteries
Battery duration indicator
The duration at which the battery indicator starts to blink is variable
depending on the type of battery used.
¶ Rechargeable batteries
When the batteries is nearly exhausted:
]In a while, the power will be turned off automatically. Then
recharge the batteries.
¶ Alkaline batteries
When the batteries are half exhausted
:
]Playback is possible while the indicator is blinking.
Battery duration indicator
PHONE(Phones/ Remote) jacks
1 Slide the OPEN switch in the direction of the arrow to open the top cover.
2 Insert disc and close the top cover.
÷ Insert with labeled side up.
÷ Secure the disc by pushing a position near the center hole unit it
clicks.
÷ Close securely by pushing the front center position of the top
cover unit it clicks.
3 Set the HOLD switch to off.
÷ For the Hold function, read "Hold function".
÷ Before any operation, be sure to set the HOLD switch to off.
4 Press the 38 key.
÷ The power comes on and playback begins.
÷ Certain CD-R/CD-RW (CD-DA) discs may not be played due to
recording conditions of the discs.
÷ The ASP function is activated permanently.
ASP
ASP (Anti Skip Protection) :
The audio signals of a certain period is stored in memory so that, even when
the signal from the optical pickup is interrupted by an external shock, this
unit can continue music without interruption.
5 Use the VOL knob to adjust the volume.
7
To pause playback temporarily
Press the 38 key during playback states.
÷ Pressing the key again resumes playback.
7
To stop playback
Press the 7 key during playback states.
÷ The total number of tracks and the total playing time of them will
be displayed.
7
To turn power off
After stopping playback, press the 7 key again.
Auto power-off function
If no operation key has been pressed for 30 seconds while the unit is in the
stop mode, the power is turned off automatically to prevent battery power
consumption.
7
Skipping tracks
Press the 4 or ¢ key.
÷ When the ¢ key is pressed, playback will skip to the start of the
subsequent track.
÷ Each time the key is pressed, playback will skip to the next track.
÷ When the 4 key is pressed, playback will skip to the start of the
track being played back.
÷ Each time the key is pressed, playback will skip to the previous track.
Playback from the first track
5
Track number Elapsed time of track
being played
ASP display
7
Fast forward, fast reverse
Hold the 4 key or ¢ key pressed during playback.
÷ Fast forward is engaged by pressing and holding down key ¢
while playback is in progress.
÷ Fast reverse is engaged by pressing and holding down key 4
while playback is in progress.
÷ Playback will resume when either key is released.
Hold function
Slide the HOLD switch in the direction of the arrow to switch the HOLD
function on.
÷ When the HOLD switch on the unit is switched on, the unit's keys cannot be
operated.
÷ When the HOLD switch on the remote control is switched on, the remote
control's keys cannot be operated.
Changing the tone
The low frequencies sound, which is felt in headphone, can be boosted.
Slide the DBBS switch to select the desired setting :
DBBS on position:
Low frequencies are boosted.
DBBS off position:
Normal tone reproduction.
÷ As a result, the audio may be distorted if the volume level is too high in a
section dominated by bass sound. In this case, set DBBS to off or decrease
the volume.
Selecting Play Mode
6
38
MODE
MODE PROG VOL
Press the MODE key for the following selections. (Press the playback status
or stop status.)
1 One-track repeat ("
1
" lights up)
The track being played or the selected track will be played repeatedly.
÷ To play the next track repeatedly, press the 4 or ¢ key.
2 All-track repeat (" ALL" lights up)
All tracks on the disc will be played repeatedly.
3 Intro Scan ("INTRO" lights up)
The first 10 seconds of all tracks on the disc will be played in the recorded
order.
4 Random playback ("RAND" lights up)
All tracks on the disc will be played in a random order.
5 Normal playback
÷ If Intro Scan or Random Playback is selected while playback is in
progress, Intro Scan or Random Play operation will commence
when the track being played back is over.
÷ If Intro Scan or Random Play is selected during stop, Intro Scan or
Random play will start when the 38 key is pressed.
÷ The program of tracks is also valid in Repeat or Intro Scan playback.
Program playback
7
Favorite tracks (max. 20 tracks) can be programmed.
38/7
PROG
MODE PROG VOL
1 Press the PROG key during stop status.
÷ Stop status is engaged when the 7 key is pressed while playback
is in progress.
2 Use the 4 or ¢ key to select the track, and press the PROG key.
PROG
ASP
÷ Repeat step 2 to select other tracks in the order you want to program them.
÷ Up to 20 tracks can be programmed in this unit.
3 Press the 38 key.
7
To clear the programmed contents
Press the 7 key.
÷ The "PROG" indicator is turned off when the program is cleared. How-
ever, the programmed contents are stored.
÷ Program mode can be canceled when the 7 key is pressed or the top
cover is open while stop status is engaged. The programmed contents
are cleared.
Å
‰
¬
ı
Ç
Ì
Ï
Ó
Î
Ï OPEN switch
Slide to open top cover
Ì HOLD
switch
Ó DC IN 4.5V (External power) jack
¬ Batteries case
MODE PROG VOL
‰
ÏÌ
Î
ÅıÇ
Î VOL (Volume) knob
‰ Display
Ï MODE key/ PROG key
Ì Clip
DBBS
PROG
INTRO
RAND
1ALL HOLDASP
Å ı Ç Î ‰
ÓÌ Ï
Ï Playing time indicator
Ì Track number indicator
Ó PROG indicator, INTRO indicator,
RAND indicator,
DC IN 4.5V
HOLD
OPEN
VOL
DBBS
7 / 38
38/7/4/¢
HOLD
VOL +/
-
MODE PROG VOL
Programmed orderTrack number
*5508_EN 04.5.12, 2:17 PM3