Filter
Top Products
DPC-981/782/781 (En/M)
WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Please read all of the safety and operating instructions before operating this unit. For best results, follow all warnings placed on the unit and adhere to the operating and use
instructions. These safety and operating instructions should be retained for future reference.
1. Power sources — The unit should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.
2. Power-cord protection — Power-supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or against them, pay particular
attention to cords at plugs, convenience receptacles, and the point where they exit from
the unit.
3. Enclosure removal — Never remove the enclosure. If the internal parts are touched
accidentally, a serious electric shock might occur.
4. Drop — Do not drop the unit or apply strong shock to it. (Damage due to dropping the
unit is not covered by the warranty.)
5. Ventilation — Avoid hindering the ventilation of the unit by covering it with a cloth, etc.
6. Abnormal smell — If an abnormal smell or smoke is detected, immediately turn the
power OFF and pull out the power cord. Contact your dealer or nearest service center.
7. Heat — Avoid placing the unit under direct sunlight or near a source of heat such as
heating equipment. Particularly, never leave it in an automobile or on the dashboard.
8. Temperature — The unit may not function properly if used at extremely low, or freezing
temperatures. The ideal ambient temperature is above +5°C (41°F).
9. Water and moisture — The unit should not be used near water — for example, near a
bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming
pool, etc.
10. Dust and moisture — Avoid places where is dusty or where the humidity is high.
11. Vibrations — Avoid placing the unit on an unstable place such as a shelf or in a place
subject to vibrations.
12. Magnetic fields — Keep the unit away from sources of magnetic fields such as TV sets,
speaker systems, radios, motorized toys or magnetized objects.
13. Cleaning — Do not use volatile solvents such as alcohol, paint thinner, gasoline, or
benzine, etc. to clean the cabinet. Use a clean dry cloth.
14. Nonuse periods — The power cord of the unit should be unplugged from the outlet when
left unused for a long period of time.
15. Damage requiring service — The unit should be serviced by qualified service personnel
when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the unit.
C. The unit has been exposed to rain.
D. The unit does not appear to operate normally or exhibits a marked change in
performance.
E. The unit has been dropped, or the enclosure damaged.
16. Servicing — The user should not attempt to service the unit beyond that described in the
operating instructions. All other servicing should be referred to qualified service personnel.
17.
CAUTION — TO PREVENT ELECTRIC SHOCK DO NOT USE THE AC PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE
FULLY INSERTED TO PREVENT BLADE EXPOSURE.
Safety precautions
IMPORTANT SAFEGUARDS
Notes on using through car stereo
• In case of abnormality such as smoke production, immediately unplug the car battery adaptor from
the cigar lighter socket.
• Do not leave the products or batteries in the car, particularly above the dashboard, for this may lead
to malfunction or damage due to solar heat.
• If the unit is connected to a car stereo using an audio cord, noise may sometimes interfere.
In case of abnormality, immediately press the open key to turn the power OFF, and unplug the
AC adaptor from the power outlet. Then please contact your nearest KENWOOD service
center.
For rechargeable battery
WARNING
• Use specified charger only.
• Do not disassemble or mutilate, may cause burns.
• Do not incinerate or heat, may cause burns, burst or release toxic materials.
• Do not short circuit, may cause burns.
• Keep away from children.
Caution: Read this page carefully to ensure safe operation.
The marking of products using lasers.
CLASS 1
LASER PRODUCT
This label is attached to the bottom panel and says that the component
uses laser beams that have been classified as Class 1. It means that the unit
is utilizing laser beams that are of a weaker class. There is no danger of
hazardous radiation outside the unit.