Filter
Top Products
Displaying the Audio Control
1 screen
Audio Control 1 screen
Displaying the Audio Control
2 screen
Audio Control 2 screen
Audio Control
1
Returns to the Control screen of the previous
source.
2
Calls the Setup Menu. (see page 57)
3
Calls the Sound Effects Menu.
4
Adjusts the right and left volume balance.
5
Adjusts the front and rear volume balance.
6
Adjusts the volume of the present source based on
the difference level of original volume.
If you have increased the volume first, then
reduced it using the "Vol. Offset", the big sound
may suddenly be generated when you switch to
another source.
7
Adjusts the subwoofer volume.
8
Turns the Loudness control function On or Off.
(Does not appear when the optional accessory DSP
unit is connected.)
If turned "On", high and low tones are automatically
enhanced during low volume. ( On)
9
Displays the Audio Control 2 screen.
p
Adjusts the bass boost of the B.M.S power
amplifier (optional accessory).
You may not set some models of power amp boost
to "+18". See the catalog or instruction manual of
power amplifier.
q
Set the center frequency of bass boost you have set
for the "AMP Bass".
If you set it to "Low", the center frequency is
dropped for 20 to 30%.
w
Displays the Audio Control 1 screen.
English 79
Audio Control
You can adjust the front and rear and right and left audio balance.
Menu
-15
Vol.Offset
Off
Audio Control 1
LOUD
Front
Rear
FAD F1 2
BAL R12
SUB -15
RRLL
FF
RR
SRC
Audio
Set Up
Menu
Flat
BMS AMP Bass
Normal
Low
BMS AMP FREQ
Audio Control 2
SRC
Audio
Set Up
1
7
7
8
9
4
4
5
5
6
6
3
2
10
10
11
11
12
DDX6017(En)r2.2 04.12.20 9:17 PM ページ79