Kanguru Solutions mp3 player and usb flash drive MP3 Player User Manual


 
3
1.2 Features
- Supports MP3 music format
- Earphone jack: 2.5 mm
-
Universal Headphone adapter
- Audio output: 5mW+5mW
- Output frequency range: 20HZ – 20KHZ
- Battery: Lithium-ION 500mA 3.7V
-
Battery Life: 7.5 hours of continuous use at full charge
- Support USB specification revision 1.1
- Transferring rate: up to 12MB per second at “Full Speed”.
- Power saving mode to reduce power consumption while unit is idle.
- Supported by Windows 2000, ME, XP, Mac OS 8.6 or above and Linux 2.4.0 or
above without device driver.
- Supported by Windows 98/98SE with device driver.
- Power LED: (i) Plug KanguruMicro MP3 into USB port to re-charge battery
through computer. Orange LED light means the battery is
charging.
(ii) Green LED light indicates the battery is fully charged.
- Play LED: (i) Red LED indicates you are in MP3 player mode.
(ii) Red LED flashes quickly when no MP3 files are found.
(iii) Red LED flashes slowly when you pause MP3 player.
(iv) Green LED indicates you are in USB removable disk mode.
(v) Green LED blinks when you are reading/writing.
- Write / delete protection switch.
- Hot Plug & Play - Enables you to install KanguruMicro MP3 at anytime.
- Durable solid-state storage – data retention for at least 10 years.
-
Erase Cycles: 1,000,000 times
- No external power is required - DC 4.5V ~ 5.5V from USB port.
- Low Power consumption
Write 39.1mA ~ 39.4mA / Read 35.0mA ~ 36.1mA.
- Read/Write Speed of USB interface: Read 800KB / Write 600KB
- Size: 91.2 x 30.4 x 26.3 mm
- Unit weight: 30g (not including battery)
-CE and FCC certificate of approval.