Filter
Top Products
POWER SUPPLY
AC power: 230-240 Volt, 50Hz
DC power: 9 Volt battery type (not
provided) for clock back-up system only.
An alkaline type battery is recommended.
For optimum performance, this battery
should be replaced every 6 months
1. Insert the AC power cord (12) into a
convenient AC power outlet. Ensure
the switch on the power outlet is in the
off position, plug in the power cord, and
then switch on at the AC power outlet.
2. Connect the 9V battery inside the
compartment at the bottom of the unit
(13).
Back-up system: Ensures that the unit
will continue to operate as normal during
an AC power disruption (in order to
preserve the battery life the display will
not light).All clock settings will be kept in
the memory, however, the clock time may
require adjustment for exact accuracy. If
this battery is not installed, the display will
blink 00:00 to indicate that you have to
reset the time and alarm settings.
SETTING THE TIME
1. Press and hold TIME (6) and press (1)
or (2) to adjust to your desired time.
2. Release Time (6) to store your settings
in memory.
LISTENING TO THE RADIO
1. Switch the function selector to the ON
position (9).
2. Switch to AM or FM position with the
Band selector (10).
3. For a better reception in FM, extend
the antenna (11). For better reception
in AM rotate the unit.
4.Adjust the volume (7) to the desired
level.
5. Select your desired radio station (8).
6.To stop listening switch to OFF (9).
SETTING THE ALARM WAKE-UP
MODE
This unit allows you to set two different
wake up times that you can choose to use
independantly or simultaneously.
• AL1 or AL2 or AL1 and 2
• Select (11) to AL1 Position.
Press and hold ALARM (5) and press (1)
or (2) to adjust your desired alarm time,
then release the ALARM (5) to store
your setting in memory.
• Select (11) to AL2 Position.
Press and hold ALARM (5) and and press
(1) or (2) to adjust your desired alarm
time, then release the ALARM (5) to
store your setting in memory.