Filter
Top Products
1. Large Snooze button
2. Tuning indicator
3. Tuning dial
4. Tuning adjustment
5. AM/FM switch
6. Volume control
7. Blue LED display
8. Auto-Buzzer-Off switch
9. Battery back-up
compartment (not shown)
10. AC Power cord
(not shown)
11. Time
12. FM wire antenna
(not shown)
13. Alarm
14. Sleep
15. Alarm off
16. Hour
17. Minute
5
6
15
POWER SUPPLY:
AC power: 230-240 Volt, 50Hz
DC power: 9 Volt battery type (not
provided) for clock back up system only.
An alkaline battery type is recommended.
For optimum performance, this battery
should be replaced every 6 months.
Insert the AC power cord (10) into a
convenient AC power outlet. Ensure the
switch is in the off position, plug in the
power cord and then switch on at the
AC power outlet.
Connect the 9V battery inside the
compartment at the bottom of the
unit (9)
Back-up system: Ensures that the unit will
continue to operate as normal during an
AC power disruption (in order to
preserve the battery life the display will
not light).All clock settings will be kept in
the memory, however, the clock time may
require adjustment for exact accuracy.
If this battery is not installed, the display
will blink 12:00 to indicate that you have
to reset the time and alarm settings.
SETTING THE TIME:
Press and hold the time button (11) and
press the Hour (16) or Minute (17) to
adjust to your desired time.
Release time (11) to store your settings
in memory.
LISTENING TO THE RADIO:
Switch the function selector to the on
position (8)
Switch to
AM or FM position with the
band selector (5)
For better reception in FM, extend the
antenna (12). In AM rotate the unit.
Adjust the volume (6) the desired level
Select your desired radio station by using
the Tuning dial, indicator and adjustment
controls (2, 3 and 4)
To stop listening to the radio switch the
function button to the off position (8)
SETTING THE ALARM AND
WAKE-UP MODE
Alarm – Press and hold the alarm button
(13) and press the hour (16) or minute
(17) buttons to adjust your desired time,
then release the alarm button (13) to
store your setting in memory.
Select your alarm mode to Auto for radio,
buzzer (for alarm sound) or off to switch
off the alarm.
STOPPING THE ALARM
The alarm is programmed to run for
1 hour 59 minutes.
Snooze (1): Press to stop the alarm
temporarily, the alarm will ring again in
approximately 9 minutes.
Alarm off (15): Press to stop the alarm
and it will sound again 24 hours later
OFF (8): Select to OFF position to turn
off the alarm permanently, the alarm
indicator/s will go off.
SLEEPING TO MUSIC
Select FM or AM by Band selector (5)
then press sleep (14), the sound will come
on for 59 minutes.To change this sleep
time, press and hold sleep (14) and use
the time setting buttons to select the
desired time.To turn off the music earlier
press snooze (1).
1
2
8
4
14
3
7
6
CARE AND MAINTENANCE
Use only a clean, dry cloth to clean the
external surfaces of the radio only. Do not
attempt to open the case of the radio at
anytime, there are no customer
serviceable parts inside. Have the radio
serviced by a qualified service agent
should the unit require access to internal
components.When not in use, pack the
radio in its original box for best
protection and store in a cool, clean and
dry location.
IMPORTANT
Do not throw batteries in fire!
This radio is designed for indoor use only.
Do not immerse in water or allow liquids
to come in contact with the radio.
The supply plug shall remain readily
operable.
No objects filled with water shall be
placed on the apparatus.The apparatus
shall not be exposed to dripping or
splashing.
17
16
13
11
Features of Kambrook Clock Radio