Jwin JX-CD427 Portable CD Player User Manual


 
Portable CD Player with AM/FM Radio V10M10_IM_EN_04242009
www.jWIN.com
OPERATING INSTRUCTIONS
Auxiliary (AUX) Mode
1. Slide the FUNCTION SWITCH to the CD/AUX position.
2. Connect the earphone socket from the Auxiliary unit (e.g. MP3 player or MD player) into
AUX-IN jack on the side of this product via an Audio Line Cord (3.5mm plug on both
ends; not supplied).
3. Play the Auxiliary unit. Music from the Auxiliary unit can be listened through the speaker
of this product.
Note: Make sure the volume level on the auxiliary unit is set high. CDs will NOT play when the
Audio Line Cord is plugged in.
Maintenance
Notes on CDs
1. Before playing, clean the CD with a cleaning cloth.
Wipe the CD from the center out to the ends.
2. Do not use solvents such as benzine, thinner,
commercially available cleaners or anti-static spray
intended for vinyl LPs.
3. Do not expose the CD to direct sunlight or heat sources such as hot air ducts. Do not
expose to direct sunlight, nor leave CDs in a car, as there can be a considerable rise in
temperature.
4. Do not stick paper or sticker on the CD. Do not scratch, dirt or fingerprints on the CD, for
it may cause tracking error.
Cleaning the lens
If the lens becomes dirty, it may cause a skipping of sound during CD operation. Clean with a
commercially available lens cleaner.
Cleaning the cabinet
Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent
solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or
benzine.