Filter
Top Products
E.5
1. Press the CD Mode button till the ‘INTRO’ appear in the display.
2. The first 10 seconds of the tracks will be played once, then stops.
3. To stop the intro play and start the normal play. Press the CD Mode button twice
more or press the stop button.
Note: If you press the button during playing, it will start the intro play after the songs fin-
ished.
RANDOM OR SHUFFLE PLAY
Plays all the tracks in random order.
1. Press the PLAY/PAUSE button and wait for a while.
2. Press the CD Mode button till ‘RND’ appear in the display during playing.
3. The display will show the first track the player select.
4. Press the skip button to skip the next random song.
5. To stop the function, press the CD Mode button once more or press the Stop button.
THE ANTI-SKIP MEMORY FUNCTION
The digital anti-skip function uses semiconductor memory to prevent the sound from
skipping when the unit is subjected to shocks and vibration during play.
• In MP3 playing mode, the electronic anti-shock function is always functional while
playing and the “ESP” appear in the display.
• In CD mode, when the ESP button is pressed during play. The “ESP” indicator ap-
pears in the display and the digital anti-skip function turns on. The digital data equiva-
lent to approximately 45 sec. Music is stored in a read head memory buffer before it
is decoded and played. When the unit is subjected to a shock during play, the
stored data will be decoded to protect the sound stop or skip. Once the pickup
returns, the new data will be read to store in the memory.
Note: The ESP/DIR NEXT button has two functions. In CD playing mode, the button is
ESP button. In MP3 playing mode, it is DIR NEXT button.
CONNECTING TO HOME STEREO SYSTEMS
The line out jack is made to accept a stereo mini plug (3.5mm). By using a commer-
cially available audio line cable, simply connect the cable’s mini plug to line out jack
on your player, and the other appropriate end to CD/AUX input(s) of your home stereo
system.
NOTE: Always switch the power off before making any connections between the player
and any other set.
NOTE: The volume control or the player become inoperable when the line out jack is
used. Adjustments are made on your audio system.
CLEANING
CLEANING THE PICKUP LENS
A dirty lens will cause sound skipping. If the lens is very dirty, the player may not work.
Open the CD door and clean the lens as follows:
• FINGERPRINTS ON LENS
Use a cotton swab starting in the middle and working to the outside edge, pay
attention in doing this operation or the pick up lens could be damaged.
LINE OUT