Filter
Top Products
E.1
LOCATION OF CONTROLS
CONTROL OPERATION AND FUNCTION
POWER SUPPLY
Your CD player requires 2 size “AA” alkaline batteries (not included), or use the AC
adapter (not included)
AC ADAPTER OPERATION
Plug one end of the AC adapter into the DC 4.5V jack, then plug the other end into
AC wall outlet.
PRECAUTIONS ON USING THE AC ADAPTER
Put in correct specs for AC adapter. Please make sure you purchase the correct AC
adapter. Use of an incorrect AC adaptor will damage the unit.Don’t touch the AC
adapter with wet hands. Doing so is dangerous, as this could result in an electric shock.
If the adapter plug is insert into the DC Jack of the Player, the power supply auto-
matically switch to the AC/DC power and the batteries supply will be disconnected.
DC OPERATION
ALKALINE BATTERY INSTALLATION (NOT SUPPLIED)
Insert two AA batteries (not supplied) into the battery compartment on the bottom
of the unit. Be sure to observe the proper polarity.
CHARGING AND USE OF RECHARGEABLE BATTERIES
This unit can fully recharge the specified rechargeable batteries, in approximately
15 hours. The rechargeable batteries (NOT supplied) should be re-
charged before they are used for the first time or they have not
been used for a long period of time (over 60 days).
1. Open the battery compartment cover and insert two of the rec-
ommended rechargeable batteries, matching polarity. (1.2V
650mA).
ALL BATTERIES MUST BE OF RECHARGEABLE NICKEL-CADMIUM
TYPE, OTHERWISE THE BATTERIES MAY EXPLODE OR LEAK.
2. Plug in the AC adapter. (not included)
3. Slide the charge switch to CHARGE position to start charging.
CD SKIP ( ) BUTTON
CD MODE BUTTON
DC IN 4.5V
ADAPTER JACK
(NOT INCLUDED)
HOLD
SWITCH
PROGRAM BUTTON
PLAY/PAUSE
(power on)
ESP
LCD (Liquid Crystal Display)
BATTERY DOOR
STOP BUTTON
(power off)
LINE OUT JACK
PHONES JACK
VOLUME
CONTROL
BASS BOOST
SWITCH
DOOR OPEN
CHARGE SWITCH