Filter
Top Products
Stereo CD Player with Dual Alarm Clock Radio V11M11_IM_EN_10102007
www.jWIN.com - 10 -
OPERATIONAL INSTRUCTIONS
Additional CD Playback Features
Programming (up to 20 tracks)
1. Slide the ON/OFF/AUTO/BUZZ Switch to ON and the FM/AM/CD Switch to CD.
2. Press PROGRAM/REPEAT and program icon "PROG" appears on the display with the
memory location "01" flashing.
3. Press SKIP/SEARCH FORWARD or SKIP/SEARCH BACKWARD to locate the desired
track.
4. Press PROGRAM/REPEAT to confirm selection. The next memory location "02" flashes
on the display.
5. Repeat steps 3 and 4 for each track you wish to program.
6. Press PLAY/PAUSE to start program playback. The "PROG" icon lights on the display.
Note: Press STOP to stop and cancel programmed playback. To change the current program,
create a new program by repeating the above steps.
Repeat Play
During playback, press PROGRAM/REPEAT repeatedly to toggle the following repeat options:
• REPEAT 1 - Repeats a single track.
• REPEAT ALL- Repeats all tracks on the CD. If the program setting is in use (“PROG”
appears on the display), this setting repeat all programmed tracks.
To cancel, press PROGRAM/REPEAT until repeat icons disappear from the display.
Random play
1. Press RANDOM to play CD tracks in random order. "RAND" appears on the display.
2. Press SKIP/SEARCH FORWARD to play the next randomly selected track.
3. Press RANDOM again to resume normal playback.
Turning Off the CD Player
Slide ON/OFF/AUTO/BUZZ Switch to OFF to turn off the CD player.
Notes: When done, remember to slide ON/OFF/AUTO/BUZZ Switch to BUZZ or AUTO so the
buzzer alarm, CD music or radio will sound at the next preset alarm time. Adjust the VOLUME
control so the alarm is loud enough to wake you up. Refer to the "Using the Alarm" instructions
in this manual for details.