Filter
Top Products
Page 11
English
XL-MV777GD/XL-MV757TN
LVT0194-001B [U, US]
BASIC OPERATIONS
Using the SHIFT button on the remote
control unit
You can control other functions with the remote control, simply by
pressing a button while holding down the SHIFT button. Some of these
functions are useful for Karaoke and Video CD playing, others for
controlling the TV.
7 SHIFT button functions to control the TV
SHIFT + VCD
/
⇒ Turns the TV on and off
SHIFT + A TIME ⇒ TV MUTE (Mute the TV sound)
SHIFT + 1 ⇒ TV Channel 1
SHIFT + 2 ⇒ TV Channel 2
•
•
•
SHIFT + 10 ⇒ TV Channel 0*
SHIFT + REPEAT ⇒ 1 - (The first digit of a TV Channel number 10
to 19. Push a number key to insert the second digit.)*
SHIFT + SUBTITLE ⇒ 2 - (The first digit of a TV Channel number
20 to 29. Push a number key to insert the second digit.)*
SHIFT + +10 ⇒ -/- - (To change a one - digit or to change a two -
digit TV channel number, using a number key.)*
SHIFT + B. SEARCH ⇒ ENTER (Push after choosing a channel.
This function registers the channel you have chosen.)*
Note
• The asterisk * indicates that these operations do not work for some
manufacturers’ television sets.
SHIFT
Using the remote control
Presetting the remote control to operate
your own TV
You can use the player’s remote control unit to control some functions
on your TV set (e.g., turning the TV on and off, adjusting volume, or
selecting channels). First, though, you must preset the remote control
to make it compatible with your TV.
Operation
1. Check the Preset Code Table (page 12) to determine the two-
digit brand code number for your TV.
2. While holding down the TV/VIDEO button on the remote con-
trol, press the number keys to insert the two-digit brand code
number. (For example, if the code number is "28", press the
number key 2, then 8. If the first digit is a "0", press 10. Thus,
if the code number is "09", press the number key 10, then 9. If
the code number is "10", press the number key 1, then 10. If
it is "20", press the number key 2, then 10.)
Notes
• Before the remote control unit leaves the factory, the brand code
number is set as No. 01 (JVC).
• Depending on your television set’s age and other factors, brand
code numbers may be different from those shown in the table. In
such a case, try out other codes until you find one that corresponds
to your television.
3. While still holding down the TV/VIDEO button, press the 7
(STOP) button on the remote control.
4. The TV is turned off if the code number is correct. Repeat the
procedure from the beginning if you weren’t successful the
first time.
TV/VIDEO
+