Filter
Top Products
15
How the Enhanced Other Networks function actually
works:
CASE 1
If there is no station broadcasting the program you
have selected
The unit continues tuning in to the current station.
«
When a station starts broadcasting the program you
have selected, the unit automatically switches to the
station. The indicator of received PTY code starts
flashing.
«
When the program is over, the unit goes back to the
previously tuned station, but the function still remains
activated.
CASE 2
If there is a station broadcasting the program you
have selected
The unit tunes in to the program. The indicator of
received PTY code starts flashing.
«
When the program is over, the unit goes back to the
previously tuned station, but the function still remains
activated.
CASE 3
If the FM station you are listening to is broadcasting
the program you have selected
The unit continues to receive the station but the
indicator of received PTY code starts flashing.
«
When the program is over, the indicator of received
PTY code stops flashing and remains lit, but the
function still remains activated.
More about the Enhanced Other Networks function
• The data sent from some stations may not be compatible with this
unit and also some stations may not include Enhanced Other
Networks data. In this case, the function may not work correctly.
• While listening to a program tuned into by the function, the
station does not change even if another network station starts
broadcasting a program of the same data.
• The function is canceled when you change the source to CD,
TAPE or AUX, while it is temporarily canceled when you change
the source to AM (MW).
• This function is also canceled when you turn off the unit.
Switching Temporarily to a Program Type of
Your Choice
The Enhanced Other Networks function allows the unit to
switch temporarily to a broadcast program of your choice
(TA, NEWS, and INFO) from a different station.
• The function only works when you are listening to a preset
FM RDS stations providing the data.
To activate the Enhanced Other Networks function
REMEMBER you must preset FM RDS stations to use the
function. If not yet done, see page 12.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start over from step
1
.
On the remote control ONLY:
1
Press TA/NEWS/INFO until the
data type you want appears on the
display.
• Each time you press the button, the data
type indication changes as follows:
The selected data type indicator (TA, News, and Info)
also flashes.
TA: Traffic announcement
NEWS: News
INFO: Program the purpose of which is to impart
advice in the widest sense.
OFF: The function is canceled. The data type
indicator (TA, News, and Info) goes off.
2
Wait for about 3 seconds after specifying
the data type.
The data type indicator stops flashing and remains lit.
Now, the function is activated. See “How the Enhanced
Other Networks function actually works.”
TA NEWS INFO
OFF
(Canceled)
TA/NEWS
/INFO
EN01-15_UX-J60&50[B]f.pm6 02.12.23, 9:33 AM15