Filter
Top Products
17
4
22
AUX
OPEN
BEAT CUT
AUX
PRESET
TUNING
ONE TOUCH
REC
VOLUME
CD
TAPE
TUNER
MULTI CONTROL
REW
ACS
STOP
FF
BAND
STANDBY
ON/STANDBY
AHB PRO
AHB PRO
SPEAKER
ILLUMINATION
/ACS
SOUND
1
3
2
1
OPEN
OPEN
BEAT CUT
AUX
PRESET
TUNING
ONE TOUCH
REC
VOLUME
CD
TAPE
TUNER
MULTI CONTROL
REW
ACS
STOP
FF
BAND
STANDBY
ON/STANDBY
AHB PRO
AHB PRO
SPEAKER
ILLUMINATION
/ACS
SOUND
CASSETTE PLAYBACK
Operate in the order shown
÷ When AC power is used
(When battery power is used, switch on the button first, then perform
operation):
USING WITH ANOTHER AUDIO UNIT
Operate in the order shown
÷ When AC power is used
(When battery power is used, switch on the button first, then perform
operation):
1 Connect the audio unit, turntable, MD player, etc. to the AUX IN jack
(see page 6).
2 Press the AUX button. (The power is switched on and the AUX mode
is engaged.)
3 Start playback on the connected audio unit.
(For more details, refer to the instruction manual of the connected
audio unit.)
4 Adjust the volume.
(The volume level is displayed in the display window.)
1 Load a cassette tape with side A facing out.
2 Press to start playback. (The power is switched on and the TAPE
mode is engaged to start tape playback.)
3 Adjust the volume.
÷ After loading a cassette tape, simply press the TAPE 23 button. The
power is switched on and the tape starts playback. (To select the
playback direction, press the TAPE 23 button. The change in direction
can be checked with the tape direction indicator (2 or 3).)
÷ When the tape plays back with the reverse mode set to (single side
play) or (both sides play) mode, the tape stops automatically at the
end of the tape after playing one or both sides. When the reverse mode
is set to the (continuous play) mode, the tape continuously plays
one side after the other until you stop operation.
Notes:
÷ Place the unit on a level surface, otherwise the cassette holder may
not open when you turn the OPEN knob.
÷ Do not turn the OPEN knob until the tape mechanism has stopped
moving.
÷ When no tape is loaded in the deck, its tape playback direction cannot
be switched over.
How to fast-wind tapes
1. Press the TAPE 23 button (to set to TAPE mode).
2. Press the 4 (REW) or ¢ (FF) button.
Close the cassette holder.
Turn the OPEN knob to the
left to open the cassette
holder.