Filter
Top Products
14
Programmed playback (for CD mode or USB mode)
Up to 32 tracks can be programmed to play in any desired order.
RANDOM
MUTING EQ
123
45
6
7
8
9
0
VOL
REMOTE CONTROL UNIT
TAPE
TUNER/
BAND
CD
USB
REPEAT
SLEEP
MENU/
FM MODE
STOP/
ENTER
PROGRAM
/
PRESET
STANDBY/
ON
/
1, 7
2
4 3, 52
1, 7
1
Press CD or USB to enter each mode,
if the unit is in TUNER or TAPE mode.
You can press CD or USB on the remote control unit
to enter each mode.
2
Press STOP/ENTER to enter stop mode.
3
Press PROGRAM/PRESET.
PROGRAM
P 01 T
Track to be programed
4
Press the number buttons on the remote control
unit to select a desired track to be programmed.
Example:
• To select track 8, press 8.
• When the total number of tracks is double-digits:
To select track 21, press 0 , 2 , then 1.
• When the total number of tracks is triple-digits:
To select track 21, press 0 , 0 , 2 , then 1.
To select track 115, press 0 , 1 , 1 , then 5.
5
Press PROGRAM/PRESET.
6
Repeat steps 4 and 5 to program other tracks.
7
Press CD or USB .
The tracks are played in the order you have
programmed.
You can press CD on the remote control unit to start
programmed playback.
“PROG” is displayed.
To repeat programmed playback
Press REPEAT on the remote control unit after starting
programmed playback.
To erase the entire program in the memory
Press STOP/ENTER (or STOP/ENTER on the remote
control unit) in stop mode when “PROG” is displayed.
The program is cleared, and the PROG indicator goes
off.
The program is also cleared when you open the disc door,
turn off the unit or change to other audio sources.
Note:
You cannot program more than 32 tracks.
“FULL MEMORY” is displayed when you program the
32nd track.
03_01-22_RC-EZ38S.p65 06.6.26, 8:48 PM14