Filter
Top Products
18
English
CASSETTE PLAYBACK
Notes on cassette tapes
• Use only type-I normal tapes. The recording/playback
characteristics of this unit are those for normal tapes,
which have different characteristics from CrO
2 and
metal tapes.
• The use of tapes longer than 120 minutes is not
recommended, since characteristic deterioration may
occur and these tapes easily jam in the pinch roller and
the capstan.
• Loose tape may cause trouble. Gently tighten the tape
with a pencil as shown in the figure below.
• To prevent recordings from being accidentally erased,
remove the tab(s) with a screwdriver. After the tabs
have been broken off, reseal the slots with adhesive
tape to erase or re-record.
Loading a cassette
1
Press § STOP/EJECT to open the cassette
holder.
2
Load a cassette with the open side up and the
playback side facing out as shown in the figure
below.
Forward direction =
3
Close the cassette holder by pressing it gently and
firmly.
The cassette holder clicks back into position.
Turn the pencil to take up
the slack.
Basic operation
RANDOM
MUTING EQ
123
45
6
7
8
9
0
VOL
REMOTE CONTROL UNIT
TAPE
TUNER/
BAND
CD
USB
REPEAT
SLEEP
MENU/
FM MODE
STOP/
ENTER
PROGRAM
/
PRESET
STANDBY/
ON
/
2 1 3 1 44
1
Press TAPE to enter the tape mode.
2
Load a cassette.
Use only a type-I normal tape.
3
Press 3 PLAY to start playback.
4
Adjust the volume.
To stop playback
Press § STOP/EJECT.
The tape also stops when it reaches the end.
Fast-winding a tape
Press 1 REW or ¡ FF.
When the tape reaches the end, press § STOP/EJECT
to release 1 REW or ¡ FF.
CSH06F134_03_Body_En.p65 2006.6.28, 11:54 AM18