Filter
Top Products
432
XL-PR2B / LVT1180-004B / B XL-PR2B / LVT1180-004B / B XL-PR2B / LVT1180-004B / B
p3 p4p2
4
VOLUME
62
VOLUME
1
5
3
RL
OFF ON
HOLD
02:5301
Button
Operation
To pause
To stop
To turn off the
unit
Fast forward/
reverse
Display/reference
07
00 81
10
44 84
Skip function
During play,
Search function
Keep depressed during play.
• Play stops automatically
when all the tracks have
been played.
For your reference:
“dISC”
This indication appears if 3/8 is pressed when no disc is loaded
or if the disc is not properly seated.
“– –”
Preparation period before playing the track
Flashes for several seconds after pressing 3/8 to play.
“OPEn”
This indication appears when the lid is open.
Removing discs
Turn off the unit and, after the disc has stopped rotating, remove
the disc as shown below:
Auto power off
If the unit is left in stop mode for 30 seconds, the unit turns
itself off automatically to prevent the batteries from running
down.
Disc rotation noise
The portable CD player uses a power-saving operation method
so that disc rotation noise will intermittently be emitted. But, it
is not a failure.
• To skip back to the previous track, quickly press 4
twice.
• During Program play, the button is used to fast for-
ward or back through the programmed sequence of
tracks.
• During Random play, the skip button cannot be used
to skip back to tracks that were played previously in
the random sequence.
During play,
During play,
Reverse
Basic Play
Total number of tracks
Total playing time
Label side
Elapsed playing time of
each track
No indication
Intro play
You can successively play the first 10 seconds of every track.
1 While stopped,
MODE
2
To cancel
Press MODE repeatedly until “INTRO” goes out.
Notes:
• You can also select Intro play during playback.
In this case, Intro play will start from the next track after the
current track has finished.
• You can also select Intro play during Program play mode.
Random play
During playback,
MODE
After playing all tracks, the unit stops.
To cancel
Press MODE until “RANDOM” goes out, or press 7 to stop the disc.
Notes:
• You can also select Random play in stop mode.
• During Program play, you can not select Random play.
Repeat play
You can repeat one track or all tracks.
During playback,
MODE
To cancel
Press MODE repeatedly until the repeat indicator goes out.
Notes:
• You can also select Repeat play during Program play.
• You can also select Repeat play while stopped.
Program play
You can program up to 24 tracks in any desired order including
the same tracks.
1 While stopped,
PROGRAM
0100
2 Select the desired track.
0103
3
0200
PROGRAM
The track is registered.
4
Repeat steps 2 and 3.
When you program exceeding 24 tracks, the program se-
quence number returns to “01” and will overwrite the previ-
ous setting.
5
• To confirm the program
While stopped, press PROGRAM repeatedly. At this time, you
can add and change the program, if required.
• To delete the entire program
Turn off the unit.
Hyper-Bass Sound effect
You can enjoy powerful bass sound.
OFF ON
HBS
Program sequence
number
Track number to be programmed
00: Not programmed yet.
e.g. Track number 3
Anti-Shock Protection EX
This function achieves excellent performance against sound inter-
ruption caused by vibrations. You will be able to enjoy listening
to music during (not vigorous) jogging.
By utilizing the high-performance servo circuit, audio data will be
stored in the memory ahead of time (up to 45 seconds worth).
Normally, this function is in effect.
As the audio data is gradually stored, the indicator changes as follows:
To cancel
A.S.P.
The “ANTI SHOCK” indicator goes out.
To activate again
Press the ASP button.
Notes:
• During this operation, the disc rotates at a higher rate than usual
in order to collect extra audio data. This may cause the batteries
to run out faster and could result in a slight increase in disc rota-
tion noise.
• This function can be switched ON and OFF during playback.
However, this may cause a slight interruption in the sound be-
cause the disc’s rotational speed changes.
Preventing Accidental Operation (Hold
mode)
This function causes the unit to ignore, accidental button presses.
Hold mode prevents the following:
• Powering on the unit accidentally (which can cause the batter-
ies to go dead).
• Play being cut off unexpectedly.
To use the Hold mode
OFF ON
HOLD
• To prevent the unit from powering on accidentally, set the
HOLD switch to the ON position while the unit is turned off.
• To prevent the unit from unexpected operation during play, set
the HOLD switch to the ON position after you starts playing
the disc.
• When the unit is in Hold mode, ”HOLD” lights as follows.
Power on : “HOLD” stays lit.
Power off : “HOLD” lights up for a few seconds when 6 or
FM is pressed.
Notes:
• Before turning on the unit, be sure that HOLD is OFF.
Otherwise, you cannot turn on the unit.
[Fully stored]
ANTI SHOCK
indicator
(Repeatedly)
Next program sequence number
Other Play Methods
(Repeatedly)
Power Supply Preparations
The illustration of the grip band is omitted.
Using dry-cell batteries
(not supplied)
Caution:
Do not forcibly open the battery lid too wide.
Battery indicator
10 44:48
This indicator appears when the batteries are almost out of power.
Power will be cut off a short while later.
Note:
Turning off the Anti-Shock Protection EX will save the battery power
more or less. For details, see “Anti-shock Protection EX” on page 4.
Battery indicator
Using the AC adaptor (not supplied)
DC IN
4.5V
Notes:
• Even if the unit is turned off, small power is consumed as long
as the AC adaptor is connected to the AC power outlet.
• When you want to purchase the AC adaptor, see page 5.
AC power outlet
The illustration of the grip band is omitted.
Follow the steps in the numerical order.
Two “R6” (LR6) alkaline batteries.
Track number in play
Firmly connect
Forward
While stopped,
Press again to restart play.
Tuner Operation
You can listen to FM stations by tuning in manually, automati-
cally, or using preset memory.
For best reception, extend the headphone cord (antenna).
Manual/Auto tuning
1
FM
107.0
2 Select a station.
Manual tuning
Press ¢ or 4 repeatedly to select a station you want.
Auto tuning
Hold down ¢ or 4 for a while and then release it. The fre-
quency automatically changes up or down to find the next station.
Presetting stations
You can preset up to 20 stations (frequencies).
1 Select the station you want to preset.
Use Manual or Auto tuning mentioned earlier.
2
107.001
PROGRAM
3 Select the preset number (01~20) you want.
107.008
PRESET DOWN
PRESET UP
4 Press PROGRAM.
Preset tuning
1
FM
87.5
2 Select the preset number you want.
PRESET DOWN
PRESET UP
107.008
Preset number
“MONO” appears.
Preset number
Preset station
(Repeatedly)
AC adaptor
(Repeatedly)
Changing the FM reception mode
When a broadcast is in stereo, “ST.” lights up and you can hear
stereo effects. However, if an FM stereo broadcast is hard to re-
ceive or noisy, you can select monaural (MONO) mode. Recep-
tion improves, but you lose the stereo effect.
To select the monaural mode
107.0
MODE
To cancel the monaural mode
Press MODE once again. “MONO” will go out.
The monaural mode is cancelled also by changing the frequency.
Turning off the unit
HBS
• When the unit malfunctions or freezes during use, discon-
nect the power source (the AC adaptor and batteries) once.
Then, re-connect the power source and continue operation.
• If tuner operation is abnormal, press the RESET switch to
reset the unit.
RESET
Note:
The preset broadcast stations you have made will be cleared
by the reset operation.