JVC KD-ADV8490 Portable CD Player User Manual


 
ENGLISH
63REFERENCES
Continued on the next page
Symptom Remedy/Cause
Bluetooth ®
The unit cannot be detected by the
Bluetooth device.
Search from the Bluetooth device again.
Reset the unit. When “Open...“ appears on the display,
search from the Bluetooth device again.
The unit does not make pairing with the
Bluetooth device.
Enter the same PIN code for both the unit and target
device.
Phone sound quality is poor. Reduce the distance between the unit and the
Bluetooth cellular phone.
Move the car to a place where you can get a better
signal reception.
The sound is interrupted or skipped during
playback of a Bluetooth audio player.
Reduce the distance between the unit and the
Bluetooth audio player.
Disconnect the device connected for “Phone.”
Turn off, then turn on the unit.
When the sound is not yet restored: Connect the player
again.
The connected audio player cannot be
controlled.
Check whether the connected audio player supports
AVRCP (Audio Video Remote Control Profile).
(Operations depend on the connected audio player.)
Disconnect and connect the Bluetooth player again.
The unit does not response when you tried
to copy the phone book to the unit.
You may have tried to copy the same entries (as stored)
to the unit. Press number button 3 to exit.
CD changer
“No Disc” appears on the display. Insert a disc into the magazine.
“No Magazine” appears on the display. Insert the magazine.
“Reset 08” appears on the display. Connect this unit and the CD changer correctly and press
the reset button of the CD changer.
“Reset 01” – “Reset 07” appears on the
display.
Press the reset button of the CD changer.
The CD changer does not work at all. Reset the unit (see page 3).
EN58-67_KD-ADV8490[J]_1.indd 63EN58-67_KD-ADV8490[J]_1.indd 63 3/11/08 10:31:47 AM3/11/08 10:31:47 AM