Filter
Top Products
– 13 –
Loading CD
On the unit ONLY:
1
Press 0 OPEN on the disc door to open the
disc door.
2
Place a disc correctly with its label side up as
shown below.
3
Press 0 OPEN again to close the disc door.
Playing Back the Entire Disc
You can play CD continuously.
1
Load CD.
2
Press CD/RANDOM,
then 3¥8.
CD play starts from the first
track.
• Pressing CD/RANDOM while the source is CD starts
Random play (see page 15). In this case, press just 3/8
to start playback.
Playing Back CD
To stop during play, press 7.
To remove the disc, press 0 OPEN.
Basic CD Operations
While playing a CD, you can do the following operations.
To stop play for a moment
Press 3¥8.
While pausing, the elapsed playing time flashes
on the display.
To resume play, press 3¥8 again.
To locate a particular point in a track
During play, press and hold 4 or ¢.
• 4 : Fast reverses the disc.
• ¢ : Fast forwards the disc.
To go to another track
Press 4 or ¢ repeatedly before or
during playback.
• 4 : Goes back to the beginning of
the current or previous tracks.
• ¢ : Skips to the beginning of the next or succeeding
tracks.
If you press and hold 4 or ¢ before playing
You can change the tracks continuously.
To go to another track directly using the number
buttons
On the remote control ONLY:
Pressing the number button(s) before or during play allows
you to start playing the track number you want.
Ex.: For track number 5, press 5.
For track number 10, press +10, then
0.
For track number 15, press +10, then
5.
For track number 20, press +10, +10,
then 0.
For track number 32, press +10, +10,
+10, then 2.
Track number Elapsed playing time
CD
This unit has been designed to play back the following CDs: Audio
CD, CD-R, and CD-RW.
Continued use of irregular shape CDs (heart-shape, octagonal, etc.)
can damage the unit.
When playing a CD-R or CD-RW
User-edited CD-Rs (Recordable) and CD-RWs (Rewritable) can
be played back only if they are already “finalized.”
• You can play back your original CD-Rs or CD-RWs recorded in
music CD format. (However, they may not be played back
depending on their characteristics or recording conditions.)
• Before playing back CD-Rs or CD-RWs, read their instructions
or cautions carefully.
• Some CD-Rs or CD-RWs may not be played back on this unit
because of their disc characteristics, damage or stain on them,
or if the player’s lens is dirty.
• CD-RWs may require a longer readout time. (This is caused by
the fact that the reflectance of CD-RWs is lower than for
regular CDs.)
correct
incorrect
EN13-16_PC-X290[B]_f.p65 04.3.11, 3:04 PM13