Jensen SMPV-xGBS Portable Multimedia Player User Manual


 
29
Recording Play Back
Select Recording Play Back from the main menu by pressing the < / > Buttons. Press the M (MODE Button) to enter.
1. Press the
►▌ Button to start playing the current track.
2. While playing, press the
►▌ Button to pause and then press again to resume.
3. To adjust the volume level, press the +/- Buttons.
4. To skip to the previous or next track, press the < / > buttons. Press and hold the < / > buttons to search within the track.
5. While playing, tap the M (MODE Button) and then press and hold the same button will return it to the main menu.
Setting Playing Mode
When recording is playing, tap the M( MODE Button) to enter the playing mode settings. The following options are
present.
Setting Repeat:
After choosing the Repeat submenu, press the < / > to select the repeat mode. Choose from 7 options: Normal, Repeat
One, Folder, Repeat Folder, Repeat All, Random and Intro. Press the M (MODE Button) to confirm.
Setting Play Rate:
After choosing the Tempo Rate submenu, press the < / > to set the rate of play.
There are 16 levels to choose from (-8 to +8), -8 is the lowest, +8 is the fastest and 0 is
normal speed. Press the M (MODE Button) to confirm.
Setting Replay (A-B):
1. When recording playback starts, choose Replay by pressing the </> and then the M (MODE Button) to enter. Now “A” starts to blink in the
screen.
2. Press > Button to set replay starting point “A”, “B” will start to flash for the end point.
3. Press > Button to set replay end point B. “A-B” stops flashing and now it starts to replay the selection between markers A and B.
4. If you want to change the marker points for a new replay selection, just press <, when “A” starts to flash, repeat above steps to complete.
5. Press M (MODE Button) again to return to normal playback and turn off the A-B repeat.