Jensen SMPV-1GBS Portable Multimedia Player User Manual


 
28
Recording
Before starting, we strongly recommend you to fully charge up the battery (min 3 hours) for stable recording
1. After turning on the unit, select Record from the main menu by pressing the < / > Buttons.
2. Press M (MODE Button) to enter record standby mode.
3. Tap the M (MODE Button) to enter record setting mode. The following options are present.
Local folder:
1. Press the < / > Button to choose and then press the M (MODE Button) to enter.
2. Select the desired local folder using the < / > Buttons then press and hold the M (MODE Button) to confirm.
3. Press the
►▌ Button to confirm the selected folder and the unit will return to Record selection.
4. Press the
►▌ Button to start recording.
5. Press and hold the
►▌ Button to save the recording.
Note: A recorded file will always start with filename REC001, the second recorded file will be REC002 and so on.
REC type:
After choosing the Record type submenu, press the < / > to set the desired recording format. There are 4 different formats to choose from (see table
below). Press the M (MODE Button) to confirm.
Fine REC In WAV format (good sound quality)
32K
Long REC In ACT format (average sound quality)
8k
Fine VOR In WAV format (good quality voice-controlled
recording : recording will pause without sound)
32K
Long VOR In ACT format (average quality voice-controlled
recording : recording will pause without sound)
8K
Exit:
Choose Exit to return to record standby mode.