Filter
Top Products
128-7377
7 of 16
-7-
b.After making sure the connectors are properly
lined up, gently press down on the receiver to
mate the connectors together. The receiver should
now be attached securely to the mounting
plate. Press the receiver into position in the boom
box housing; it will click into place. Apply power to
the JXM900B by pressing the Power ON/OFF button;
the LED indicator lights green. If the Receiver does
not turn on at the same time, press the Power On/
Off (
) button in the upper left corner of the Receiver
front panel.
4.Removing the Receiver From the JXM900B
Press the EJECT button on top of the Boom Box; the
receiver will swing out automatically. Gently grasp each
side of the Receiver at the top and pull straight up to
disengage it from the mounting plate.
INSTALLING/REMOVING
THE JXM900R
JXM900R
RECEIVER
INSTALLED
MOUNTING
PLATE SWUNG
OUT
PUSH IN AT TOP TO
SECURE IN PLACE
MOUNTING
PLATE GUIDE
SPINES
MOUNTING
PLATE
RECEIVER
COMPARTMENT
CONNECTOR
GUIDE PIN
EJECT BUTTON
JXM900R
CONNECTOR