Filter
Top Products
13
iPod is not installed
properly.
Remove your iPod from the dock and
check for obstruction on the
connectors in the dock and on your
iPod. Then reseat it in the dock.
iPod is locked up/ frozen.
iPod battery has problem.
Please make sure your iPod is working
properly before docking into the unit.
Please refer to your iPod manual for details
on resetting.
AM band is too
noisy.
The reception at the set
location is poor.
iPod is docked or near
the unit
Slightly rotate the unit for the best
reception.
Remove the iPod from the dock and
move it away from the unit.
Volume level is set too
high.
Decrease the volume.
If the iPod original sound source is of
poor quality, distortion and noise are
easily noticed with high-power
speakers. Try a different audio source
such as a music CD.
Sound is
distorted.
Sound source is
distorted.
If you are using an external sound source
like older generation of iPod, try reducing
the output volume on the device itself. Also
try turning bass boost OFF or change the
EQ setting.
Unit gets warm
after extended
play at high
volume.
This is normal.
Turn the unit off for a period of time or
lower volume.
SPECIFICATIONS
Power Requirement
Main Unit
AC 120V~ 60Hz 10W
Back-up Battery for Clock 1 x DC 9V 006P(6F22) Battery
Frequency Range
Radio AM 530 - 1710 kHz
FM 88 - 108 MHz
"Made for iPod" means that an electronic accessory has been designed to
connect specifically to iPod and has been certified by the developer to meet
Apple performance standards.