Filter
Top Products
User manual of JDTV-350, page 8
(iii) BG color: Default, Black, Red, Green, Blue, Yellow,
Magenta, Cyan.
(iv) FG opacity: Default, Solid, Flashing, Translucent,
Transparent.
(v) BG opacity: Default, Solid, Flashing, Translucent,
Transparent.
5. Restore Default: chose this to clear all personal preferences &
settings and restore to factory default settings.
CHANNEL
1. Auto Scan:
When selected, will automatically seek out all available
channels in your viewing area. Make sure the antenna is fully
extended or you are using the external magnetic base antenna
prior to scanning for channels.
(i) Press the CH- button to scroll down to Auto Scan.
(ii) Press the OK button to start the scan
(iii) Once the scan is complete, the TV will automatically start
playing the lowest channel found.
(iv) You can now use the CH+ and CH- buttons to change the
channels.
2. Show/Hide
Allows you to edit the channels you want shown on the TV once the scan is completed.
(i) Use the CH- to scroll down to Show/Hide
(ii) Press OK to enter.
(iii) A list of all the channels found will display and a “V” will be shown next to the channel if it will show
up when using the CH+ and CH- buttons during normal operation.
(iv) Press the CH- button to scroll down through the channels.
(v) Press the OK button to show the channel (“V” shown next to the channel) or to hide the channel
(no “V” shown next to the channel).
(vi) Press the MENU/EXIT button three times to return to normal viewing.
3. Channel No.
Displays the current channel you are currently viewing.
4. Channel Label
Displays the call letters of the TV station you are currently viewing.
(i) You can edit the channel label by pressing the OK button.
(ii) Use the VOL+/- and CH+/- buttons to edit the name you want displayed for the channel.
(iii) Press the OK button when completed.
5. DTV Signal
Displays the signal strength or the TV station you are currently viewing.
CARE AND MAINTENANCE
1. Children should be supervised when using this TV set.