Filter
Top Products
JDTV-1020 User Manual, page 14
PICTURE MODE
w Press PICTURE button to enter picture mode.
w Keep pressing this button to scroll through the different
modes available.
w Picture modes available are Standard, Dynamic, Soft and
Personal.
MTS (SOUND TRACK) MODE
This is used to change the audio output language.
w Press MTS button to enter audio language selection
mode :
w Press ‡ or ˆ buttons on the remote to select a different
audio language supplied by the signal provider (not
available in all channels)
TIMER SETTING
The TV will go into standby mode automatically after the
period of time you select.
w Press the SLEEP button on the remote and the Sleep
Timer will appear on the screen.
w Keep pressing the SLEEP button to select different time.
w The sleep time can be set to one of the following times,
Off/5/10/15/30/45/60/90/120/180/240 Min.
ZOOM
It is used to change the screen aspect ratio.
w Press the ZOOM button to change the display mode.
w The display proportion can be adjusted between Wide (16:9) and Normal (4:3) mode.
INFO (INFORMATION)
This is used to display current program information.
w Press INFO button, the screen will display as below: