Jensen JCR-208 Clock Radio User Manual


 
7
ALARM OPERATION
SETTING THE WAKE UP TIME
1. Press and hold the ALARM BUTTON and repeatedly press the HOUR
BUTTON to set the correct wake up Hour.
2. Press and hold the ALARM BUTTON and repeatedly press the MINUTE
BUTTON to set the correct wake up Minute.
NOTE
There is a PM INDICATOR located in the top left-hand corner of the clock
display. Be sure to observe the PM indicator when setting the alarm to make
sure the alarm time is set correctly for AM or PM. If the PM indicator is 'On', the
alarm time will be "PM". If not, the alarm time will be "AM".
CHECKING THE WAKE UP TIME
Whenever you want to check the wake up time, simply press the ALARM
BUTTON. The display will change from current time to wake up time. Release
the ALARM BUTTON to return to current time.
WAKE TO RADIO
1. Slide the FUNCTION SELECTOR to “ON”, select the band, station, and
adjust the volume to a level that you wish to hear when the wake up time is
reached, then slide the FUNCTION SELECTOR to the “AUTO” position. The
AUTO INDICATOR will light on the display.
2. Reconfirm the wake up time setting by pressing the ALARM BUTTON.
3. At the selected wake up time the radio will turn 'On' and will play for about
two hours and then shut off automatically.
4. To stop the radio before it shuts off, press the ALARM BUTTON. The radio
will stop but the alarm remains set and will turn the radio on again at the
same time on the following day.
5. If you do not want the radio to turn on the following day, set the FUNCTION
SELECTOR to the “OFF” position. The AUTO INDICATOR will go off.
WAKE TO ALARM
1. Set the FUNCTION SELECTOR to the “ALARM” position. The AUTO
INDICATOR will light up to confirm that the alarm is set.
2. At the selected wake up time the alarm will sound and continue for about
two hours and then shut off automatically.
3. If you want to listen to the radio after the wake up time, set the FUNCTION
SELECTOR to the “AUTO” position. Adjust the tuning and volume for the
radio program if required.
4. To stop the alarm, press the ALARM Button once. The alarm will stop but
the alarm remains set and will turn on the alarm on again at the same time
the following day.