Jensen JCCSPK Portable Speaker User Manual


 
REAR R
REAR R
FRONT R
FRONT R
FRONT L
FRONT L
REAR L
REAR L
GREEN(+)GREEN(+)
GREEN/BLACK(-)GREEN/BLACK(-)
WHITE(+)WHITE(+)
WHITE/BLACK(-)WHITE/BLACK(-)
GREY(+)GREY(+)
GREY/BLACK(-)GREY/BLACK(-)
PURPLE(+)PURPLE(+)
PURPLE/BLACK(-)PURPLE/BLACK(-)
CENTER
CENTER
BROWN(+)BROWN(+)
BROWN/BLACK(-)BROWN/BLACK(-)
JENSEN
HEAD UNIT
EXAMPLE
If your head unit has a built-in center channel amplifier, connect the positive (+)
terminal from the head unit to the positive (+) terminal on the speaker (the striped
wire). Connect the negative (-) terminal from the head unit to the negative (-)
terminal on the speaker.
Wiring
NOTE: To prepare the
wires for connection,
strip approximately
3/8" of the insulation
from each wire,
exposing the bare
conductors. Twist the
end of each wire
before connecting.
Connecting to a Built-in Center Channel Amplifier
PAGE 3
NOTE: Speaker wire
colors are for
illustrative purposes
only. Please refer to
the owner's manual to
determine the wiring
colors for your radio.