JBL Stage III MP3 Docking Station User Manual


 
COMPATIBILITY The JBL On Stage II system incorporates the Apple
®
iPod Universal Dock adapter and is
compatible with most docking versions of iPod, including nano and 5G versions. A stereo mini jack connection also allows
you to enjoy high-quality audio from a variety of other devices such as MP3 and CD players, desktop computers (all platforms)
and laptops.
EASY-TO-USE TOUCH CONTROLS Just a touch increases or decreases the volume. A touch on
both pads mutes or unmutes the system. The JBL On Stage II system also remembers your last volume setting, even after
it shuts down.
TRANSPORTABLE Take your JBL On Stage II system on the road for great sound, wherever you go. The light-
weight, compact sound station offers full, rich sound in any location.
ADDITIONAL FEATURES
OnePoint design –
The OnePoint iPod connectors provide the connection to your computer. Connect the standard
iPod cable to the back of the JBL On Stage II unit, and every time you dock your iPod, you will have a connection
for synchronizing.
Evercharge topology –
The JBL On Stage II system charges your iPod, even when it’s not connected to the computer,
or if the system is off.
An auxiliary audio input cable is also included. The surface-gripping rubber feet provide a stable platform on most surfaces.
ADVANCED TECHNOLOGY The JBL On Stage II system combines many proprietary technologies for
the highest quality sound. It produces astonishing bass and clear, accurate sound.
Odyssey
®
transducers
– The four aluminum-domed transducers are driven by powerful neodymium magnets. This design
results in a full, rich frequency response, from the lowest bass to the highest highs.
COE (Computer-Optimized Equalization)
– System equalization is computer-optimized to provide a rich, complete soundstage.
OCT (Optimized Compression Topology)
– The JBL On Stage II system utilizes a proprietary compression technology to
ensure clean, accurate sound at high output levels.
DETAILED TECHNICAL SPECIFICATIONS
Manufacturer: JBL, Inc.
Model Name: JBL On Stage
™*
II
Available in: Black
Input Requirement: Main connection – iPod
®
docking connector
Auxiliary connection – 1/8" (3.5mm) stereo mini jack
Drivers: Four Odyssey
®
neodymium transducers
Power: 6 Watts per channel
Frequency Response: 80Hz – 20kHz
Dimensions: Diameter – 7" (175mm)
Height – 2" (50mm)
Weight: 1 lb (0.45kg)
Input Impedance: >5k Ohms
Signal-to-Noise Ratio: >80dB
Voltage Input: 120V AC U.S., 100V AC Japan, 230V AC Europe
Harman Consumer Group, Inc.
250 Crossways Park Drive, Woodbury, NY 11797 USA
www.jbl.com
© 2008 Harman International Industries, Incorporated. All rights reserved.
JBL and Odyssey are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries.
*The trademark On Stage is used with permission of OSA International, Inc. Apple and iPod are trademarks of Apple Inc., registered in the
U.S. and other countries. “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has
been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards.
JBL ON STAGE
™*
II
LOUDSPEAKER FOR iPOD
®
WITH
UNIVERSAL DOCK ADAPTER