Filter
Top Products
5
RECEIVER/AMPLIFIER
LEFT S412P
II
RIGHT S412P
II
LEFT
RIGHT
Y-Connector
(not included)
LFE IN LFE IN
SUBWOOFER OUT
Each S412PII speaker is also
equipped with a line-level
Low-Frequency Effects
(LFE/Subwoofer) input for
superior performance with
digital surround formats. The
.1 LFE channel contains
additional low-frequency
information not found in the
left- and right-front
channels. The LFE input
works with the full-range
speaker-level input to
provide the dynamics and
effects that your favorite
filmmakers intended.
You will need to use a
Y-Connector (not included)
with one male connector
and two female connectors
to connect the line-level
subwoofer output on your
receiver/amplifier to the
LFE/Subwoofer inputs on the
S412PII speakers. Plug the
male connector into the
subwoofer output on your
receiver or amplifier, and
connect each of the two
female connectors to
extension RCA patch cords.
Then plug each patch cord
into the LFE/Subwoofer input
of the left and right S412PII
speakers. Note: If your
receiver has separate
left and right line-level
subwoofer (or LFE) output
jacks, you do not need to
use a Y-Connector.
LINE-LEVEL CONNECTIONS