JBL ES Series Portable Speaker User Manual


 
ES SERIES
ES10 ES20 ES30
Frequency Response (–3dB) 65Hz – 40kHz 60Hz – 40kHz 50Hz – 40kHz
Max. Recommended Amplifier Power* 100W 125W 125W
Power Handling (Continuous/Peak) 50W/200W 60W/240W 70W/280W
Sensitivity (2.83V/1m) 86dB 86dB 88dB
Nominal Impedance 8 Ohms 8 Ohms 8 Ohms
Crossover Frequencies 3000Hz – 24dB/octave; 3300Hz – 24dB/octave; 3000Hz – 24dB/octave;
9000Hz – 18dB/octave 12,000Hz – 18dB/octave 9000Hz – 18dB/octave
Low-Frequency Transducer 4" (100mm) PolyPlas,
5" (130mm) PolyPlas,
6" (160mm) PolyPlas,
shielded shielded shielded
High-Frequency Transducer 3/4" (19mm) Titanium- 3/4" (19mm) Titanium- 3/4" (19mm) Titanium-
laminate dome, shielded; laminate dome, shielded; laminate dome, shielded;
EOS waveguide EOS waveguide EOS waveguide
Ultrahigh-Frequency Transducer 3/4" (19mm) Polyester-film 3/4" (19mm) Polyester-film 3/4" (19mm) Polyester-film
ring-radiator, shielded; ring-radiator, shielded; ring-radiator, shielded;
EOS waveguide EOS waveguide EOS waveguide
Dimensions With Grille 7-7/8" x 12" x 5-1/2" 12-1/2" x 6-7/8" x 8" 15-1/4" x 8-3/4" x 13"
(H x W x D) (201mm x 305mm x 140mm) (318mm x 174mm x 203mm) (387mm x 223mm x 330mm)
Weight per Speaker 8.8 lb (4kg) 10.3 lb (4.6kg) 19.6 lb (8.9kg)
ES80 ES90 ES25C
Frequency Response (–3dB) 45Hz – 40kHz 36Hz – 40kHz 80Hz – 40kHz
Max. Recommended Amplifier Power* 200W 225W 150W
Power Handling (Continuous/Peak) 100W/400W 110W/440W 75W/300W
Sensitivity (2.83V/1m) 90dB 91dB 90dB
Nominal Impedance 8 Ohms 8 Ohms 8 Ohms
Crossover Frequencies 700Hz, 3600Hz – 24dB/octave; 500Hz, 3000Hz – 24dB/octave; 3000Hz – 24dB/octave;
12,000Hz – 18dB/octave 12,000Hz – 18dB/octave 12,000Hz –18dB/octave
Low-Frequency Transducers Dual 6" (160mm) PolyPlas,
Dual 8" (200mm) PolyPlas,
Dual 5" (130mm) PolyPlas,
shielded shielded shielded
Midrange Transducer 4" (100mm) PolyPlas, 4" (100mm) PolyPlas, NA
shielded shielded
High-Frequency Transducer 3/4" (19mm) Titanium- 3/4" (19mm) Titanium- 3/4" (19mm) Titanium-
laminate dome, shielded; laminate dome, shielded; laminate dome, shielded;
EOS waveguide EOS waveguide EOS waveguide
Ultrahigh-Frequency Transducer 3/4" (19mm) Polyester-film 3/4" (19mm) Polyester-film 3/4" (19mm) Polyester-film
ring-radiator, shielded; ring-radiator, shielded; ring-radiator, shielded;
EOS waveguide EOS waveguide EOS waveguide
Dimensions With Grille 42-11/16" x 8-3/4" x 13" 42-11/16" x 10-1/4" x 15-1/8" 7" x 18-3/4" x 10"
(H x W x D) (1084mm x 223mm x 330mm) (1084mm x 260mm x 384mm) (178mm x 476mm x 254mm)
Weight per Speaker 46.3 lb (21kg) 53.4 lb (24.2kg) 16.7 lb (7.6kg)
ES250P ES150P
Frequency Response 25Hz – 150Hz 27Hz – 150Hz
Amplifier RMS Power 400W 300W
Amplifier Peak Dynamic Power
700W 500W
Crossover Frequencies 50Hz – 150Hz; 50Hz – 150Hz;
24dB/octave, continuously variable 24dB/octave, continuously variable
Driver 12" (300mm) PolyPlas
10" (250mm) PolyPlas
Dimensions (H x W x D) 19-3/4" x 15-3/4" x 16-7/8" 18" x 13-1/4" x 15-1/4"
(with grille) (502mm x 400mm x 428mm) (457mm x 387mm x 368mm)
Weight 43 lb (19.5kg) 39 lb (17.7kg)
Available in:
Black
Cherry
*
The maximum recommended
amplifier power rating will ensure
proper system headroom to allow
for occasional peaks. We do not
recommend sustained operation
at these maximum power levels.
The peak dynamic power is
measured by recording the
highest center-to-peak voltage
measured across the output of a
resistive load equal to minimum
impedance of the transducer,
using a 50Hz sine wave burst,
3 cycles on, 17 cycles off.