Filter
Top Products
English
SYSTEM CONNECTIONS
If you have a Dolby
®
Digital or DTS
®
receiver/processor
with a low-frequency-effects (LFE) or subwoofer output:
5
If your receiver/processor does not contain a Dolby Digital
or DTS processor, but has subwoofer outputs:
Set line-level/LFE switch to
“Normal.”
NOTE: If your receiver/processor
has only one sub out, you may
use either the L or R input.
Set LFE/Normal switch to “LFE.”
33346_JBL ES150_250P_ENG 14/06/07 11:14 Side 5