Filter
Top Products
9
Getting Acquainted with the EON 206P Powered Mixer
This part of the EON 206P system houses the mixing board and power amplier. You will connect all of the
microphones, musical instruments, external sound sources (like MP3 or CD players), in addition to any recording
devices or additional speakers like a personal monitor, subwoofer or “Front of House” feed.
The Basics
The mixing board is actually a very simple device. A “mixing board” brings audio sources “in” (through
the inputs) and routes the signal to the outputs (MASTER VOLUME/SPEAKER OUTPUTS or MONITOR
OUTPUTS). The mixer controls enable the user to affect the tone and/or volume in addition to routing the signal
and adding reverb to individual input sources.
Let’s look at the “inputs” rst:
AUDIO INPUTS
The EON 206P has 6 inputs: 2 mono inputs and 2 stereo inputs.
All of the inputs will route to the speakers and to the MONITOR OUTPUT SECTION.
MONO MIC/LINE INPUTS
Moving from left to right there are 2 identical input strips comprised of (from top to bottom) a treble control,
bass control, reverb control, reverb on/off button, volume control, mic/line selector and a XLR 1/4"
combination conector.
POWER
LIMIT
MASTER
VOLUME
VOLUMEVOLUME
L
R
L
R
VOLUME
REVERB
BASS
TREBLE
VOLUME
REVERB
BASS
TREBLE
ON OFF
MIC LINE
ON OFF
MIC LINE
DESIGNED AND ENGINEERED IN THE USA
MONITOR
OUT
CH 5/6CH 3/4CH 2CH 1
JBL PROFESSIONAL
NORTHRIDGE, CA. USA
A HARMAN INTERNATIONAL COMPANY
SERIAL NO:
POWER
LIMIT
MASTER
VOLUME
VOLUMEVOLUME
L
R
L
R
VOLUME
REVERB
BASS
TREBLE
VOLUME
REVERB
BASS
TREBLE
ON OFF
MIC LINE
ON OFF
MIC LINE
DESIGNED AND ENGINEERED IN THE USA
MONITOR
OUT
CH 5/6CH 3/4CH 2CH 1
JBL PROFESSIONAL
NORTHRIDGE, CA. USA
A HARMAN INTERNATIONAL COMPANY
SERIAL NO: