IRiver T20 MP3 Player User Manual


 
16
Connection/Installation
Gettingstarted
Connection/Installation
15
Gettingstarted
Charging the battery
Note
Youcanchargingthebatteryattunedofftheplayer.
Chargingtime:Approx.3.5hours(Atfullydischarged/Stopmode)
1. Connect the player to PC after push the USB lever and pull out the USB connection
port as below picture.
Ifthe iconisdisplayed,thebatteryisoutofpowerandyoushouldcharge
thebattery.
2. “USB Connected” on the display is appeared, charging indicator is displayed.
Installing iriver plus 2
3. Disconnect the player to PC when charge is completed and then pull in USB
connection port as picture.
1. The program installation process will
start automatically after inserting the
Installation CD to the PC's CD-ROM
drive. If the program installation
process does not start automatically,
click the "My Computer"icon and run
“iriver2_setup_full.exe ” file in the CD--
ROM drive.
2. If the "Installer Language"window
appears, select the desired language
and click the [OK ] button.
3. Follow the on screen instructions,
which appear as each window.
4. If the "License Agreement" window
appears,click the [I Agree ] button.
Note : System Requirements
300 MHz Pentium processor or higher
Windows 2000/ XP
Microsoft Internet Explorer version 6.0 or later
128MB RAM
SVGA or high resolution monitor
(800x600 resolution or higher)
The minimum PC requirements for running iriver plus are as follows.
WhenyouconnectT20toyourPC,iriverplus2willbestartedandalltitlesandPlaylistsinthelibrarywillbetransferred
toT20Inaddition,youcancreateandmanageyourownPlaylist.