IRiver iMP-700 Portable CD Player User Manual


 
CAUTION!
Setting the Password
30
Changing the Password
Select “CHANGE” on the “MENU
GENERAL Password”.
Input the old password. (The
initial password is “0000”)
Input the new password of 4
digits.
Input the new password of 4 digits
to confirm once more.
If the password to change and the password to confirm are the same,
the password is automatically changed to the new one and the playback
screen is displayed on the LCD.
If you select “ON” on the password menu, you must input the new password
to turn on the player.
If the password to confirm is different from the changed password, the
password screen goes back to the Confirm screen.
Press the STOP button to exit changing the password, and the old
password is preserved.
The Password is initialized as “0000” when the firmware is upgraded.
or
or
If you select “ON” on the MENU
GENERAL Password, the right screen
is displayed after loading screen when
you turn the player on.
Select the menu you want on the “MENU
GENERAL Password”.
(Refer to page 22)
ThePasswordmustbe4digits.
After selecting the numeral by using
, button, press the PLAY or
NAVI button to input the password.
Press
, to move the numeral and press the PLAY or NAVI button
to select it. The screen as below is displayed.
When the input password is correct, the above screen is disappeared and
changed to Total screen. Press the PLAY button to start the playback.
- If the password is wrong, the screen goes back to the input screen.
- The Password must input as 4 digits.
- The Password is initialized as “0000” when the firmware is upgraded.
31
NOTE