Filter
Top Products
26
27
SD INTERLACE
When connecting to a TV equipped with Y/Cb/Cr video input.
SD
PROGRESSIVE
When connecting to a TV equipped with Y/Pb/Pr video input. Enabling this option will
make VIDEO OUTPUT options disabled.
720P When connecting to a TV supports high denition video input, enabling this option will
output a 16:9 up-scaling component video format for High Denition displays.
Enabling this option will make TV STANDARD / TV DISPLAY / VIDEO OUTPUT
options disabled, and the DVD/JPEG ZOOM function will also be disabled at this mode.
Note You’ll have to exit the • SETUP MENU for these settings to take place.
By holding and then pressing • MENU button on the remote control, or pressing
the button on the keypad, the video output format can be switched in the following
sequence: 720p SD PROGRESSIVE SD INTERLACE NTSC / PAL (toggle)
and so on. If you nd the display incorrect, try this method to get back to standard
NTSC or PAL video output, and then congure the video setup correct.
COMPONENT OUTPUT
After Exiting the settings, choose the movie folder that you want by using the up and down
arrows on your remote. Press Play to View.