Filter
Top Products
9
NS-P7DVD15/NS-P7DVD15MX Portable DVD Player
www.insigniaproducts.com
Connecting to a 12V car power adapter
The 12V car power adapter lets you use your DVD player in vehicles that
have a 12V, negative ground electrical system.
To connect to a 12V car power adapter:
1 Plug the car power adapter into the DC IN jack on your player.
2 Plug the adapter into a 12V vehicle power outlet.
3 Turn off your player. The red charge indicator turns on.
Cautions
• Do not use in 24V vehicles or you could damage your DVD
player.
• Use the included 12V car power adapter only. Use with
other car power adapters could damage your player.
• The 12V car power adapter included with this DVD player
is for its use only. Do not use it with other equipment.
• In the interest of traffic safety, do not operate your player
or view videos while driving a vehicle.
• Make sure your player is securely fastened to prevent it
from falling or flying through the air in the event of an
accident.
• When the inside of the vehicle outlet is dirty with ashes
or dust, the plug section may become hot due to poor
contact. Be sure to clean the vehicle outlet before use.
Make sure the ignition key is off when you clean the
socket. Clean the socket with a dry cloth.
• After use, disconnect the 12V car power adapter from
both the DVD player and the vehicle outlet.
NS-P7DVD15-NS-P7DVD15MX_14-1032_MAN_V2_ENG.fm Page 9 Monday, September 8, 2014 12:16 PM