Filter
Top Products
V2 ENGLISH 14-1033
Playing a DVD or audio CD
Note: Most DVDs and your DVD player have region codes that help control illegal distribution of DVDs.
The region code for your player (NS-P7DVD15) is 1 (US and Canada). You can only play DVDs with a
region code of 1 or ALL. The region code for a DVD is printed on the DVD or the DVD packaging.
The region code for your player (NS-P7DVD15MX) is 4 (Mexico). You can only play DVDs with a
region code of 4 or ALL. The region code for a DVD is printed on the DVD or the DVD packaging.
1 Make sure that your player is connected to power or your battery is charged.
2 Slide the ON/OFF switch to the ON position.
3 Press the (Open) button, the disc tray opens.
4 Place a disc, label side up, in the disc tray, then close the tray. The disc starts
playing automatically.
TROUBLESHOOTING
SPECIFICATIONS
CONNECTING HEADPHONES
When headphones are plugged into the (headphone) jack, no sound
comes from the built-in speaker.
To connect headphones:
• Plug your headphones (not included) into the (headphone) jack.
CONNECTING TO A TV OR MONITOR
You can connect your DVD player to a TV or monitor so you can watch DVDs
on the TV or monitor.
1 Plug the included AV adapter cable that has one black connector into the
AV OUT jack on your DVD player.
2 Use a standard RCA A/V extension cable (not included) to connect the TV
to the AV adapter cable of the DVD player. See below gure.
Note: You may have to select the correct input on your TV or monitor.
LEGAL NOTICES
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply within the limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment o and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC warning
Changes or modications not expressly approved by the party responsible for compliance with the FCC
Rules could void the user’s authority to operate this equipment.
IMPORTANT SAFETY INSTRUCTIONS
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with a dry cloth.
7 Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8 Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including ampliers) that produce heat.
9 Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
10 Only use attachments/accessories specic by the manufacturer.
11 Unplug this apparatus during lightning storms or when unused for long periods of time.
12 Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
13 To reduce the risk of re or electric shock, do not expose this device to rain, moisture,
dripping, or splashing, and no objects lled with liquids, such as vases, shall be placed on it.
14 The wall plug is the disconnecting device. The plug must remain readily accessible.
15 Batteries should not be exposed to excessive heat such as sunshine, re, or the like.
ONE YEAR LIMITED WARRANTY
For complete warranty, visit www.insigniaproducts.com.
CONTACT INSIGNIA
For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies. Registered in some countries. Distributed by Best
Buy Purchasing, LLC, 7601 Penn Ave South, Richeld, MN 55423 U.S.A. ©2014 Best Buy. All rights reserved. Made in
China
or
VIDEO
In
AUDIO
In
White = left audio
Red = right audio
Yellow = video
TV
Monitor
AV adapter cable
RCA cable
(not included)
PROBLEM
No power
No sound or
distorted sound.
Cannot fast-forward
or fast-reverse
through a movie.
The icon
appears on the
screen.
Picture is distorted.
Disc does not play.
Play starts, then
stops immediately.
SOLUTION
• Make sure that the AC power adapter is plugged in and connected.
• Make sure that your player is turned on.
• If using in battery mode, the battery may be discharged.
• Adjust the volume.
• Make sure that all cables are inserted correctly into the appropriate jacks.
• Make sure that your player is not paused.
• Make sure that your player is not in fast forward or fast reverse mode.
• Make sure that your player is not too hot. Let it cool for 30 minutes, then try it again.
• Make sure that the headphones are not plugged in.
• Mute button may be active!
• You cannot fast-forward through opening credits and warning information at the
beginning of a movie.
• Some DVDs do not allow rapid scanning or skipping of titles or chapters.
The action you tried cannot be done because:
• The DVD software does not allow it.
• The DVD does not support the feature (for example the Subtitle feature).
• The feature is not available at the current point on the DVD.
• You entered a title or chapter number that is out of range.
• During fast-forwarding or fast-reversing, distortion is normal.
• The DVD may be damaged. Try another DVD.
• Make sure that the disc is inserted with the label side up.
• Make sure that the disc is compatible with your player. Your player can play DVDs
and audio CDs.
• Make sure the disc surface is clean with no major scratch marks.
• Make sure that the region code for the DVD matches the region code for your player.
Your player’s region code is 1 for the USA and Canada and 4 for Mexico. The DVD’s
region code is on the DVD or the DVD packaging.
• Make sure that the disc is not dirty.
• If condensation has formed inside your player, let your player dry out.
100-240V
50/60Hz 0.3 MAX
9V- - -1A
Power adapter
Input
Output