Insignia NS-CLIP01 Clock Radio User Manual


 
Congratulations on your purchase of a
high-quality Insignia product. Your
NS-CLIP01 represents the state of the art in
clock radios with an iPod/iPhone dock and
is designed for reliable and trouble-free
performance.
Package contents
Clock radio with iPod/iPhone dock
AC power adapter
AAA batteries (2)
Quick Setup Guide
Works with all docking iPods and iPhones.
Installing the batteries
1 Open the battery compartment on the bottom of
your radio.
2 Place two AAA size batteries in the battery
compartment.
Make sure to match the + and - on the battery to
the + and - signs in the battery compartment.
3 Close the battery compartment until it clicks into
place.
Connecting the AC adapter
1 Plug the small connector at the end of the power
cord into the DC IN 5.9V jack on the back of your
radio.
2 Plug the AC adapter into a 100-240V, 50/60Hz
power outlet.
The clock radio enters standby mode and the time
appears on the display.
Turning the radio on and o
1 In standby mode, press and hold
POWER/SOURCE to turn on the clock radio. The
Source name appears in the upper left-hand
corner of the display.
2 When you turn on the clock radio for the rst
time, iPod mode activates by default.
For normal use, the system activates the last
source used before you powered it o.
3 Press and hold POWER/SOURCE again to switch
to standby mode. The Source name is no longer
displayed.
Volume control
After you select the mode you want, press
Volume + or Volume - to set the volume to a
comfortable level.
Note: When the volume is turned to minimum (00),
the system enters MUTE mode.
Quick Setup Guide
Clock Radio with iPod/iPhone Dock NS-CLIP01
Important notes
The two AAA batteries are only for the clock memory. When battery power is low, or if they
are installed incorrectly, the logo shows on the display. Change or reinstall the
batteries.
Please remove the batteries if your clock radio is not used for a long time.
Precautions when using batteries
Use only the size and type of batteries specied.
Do not mix dierent types of batteries together (e.g., alkaline, rechargeable, and standard
(carbon zinc), or old batteries with fresh ones.
Exhausted batteries must be removed to prevent any battery leakage.
Dispose of batteries properly according to environmental regulations.
Battery (battery pack or battery installed) shall not be exposed to excessive heat, such as
sunshine, re, or the like.
# Component
1 Dock
2 Alarm 1/Alarm 2
3 Sleep
4 /Preset
5 Tune
6 Tune
7 VOL+/VOL-
8 SNOOZE/DIMMER
9 Power/Source
10 ANT
11 CLOCK/SYNC
12 AUX IN jack
13 DC IN 5.9V jack
Description
Insert your iPod/iPhone into this dock to play selections through your clock radio.
The clock radio charges the iPhone/iPod when docked. Use the adapter that came with your
iPod/iPhone, if needed.
Press to set the alarm. See Setting the alarm on the right.
Press to turn on the Sleep timer
(15, 30, 45, 60, 75, 90). To turn o, press until “00” appears on
the display.
• In iPod mode, press to begin playback. Press again to pause playback. Press again to resume
playback. Press and hold to turn o your iPod/iPhone screen.
• In FM mode, press to select a preset station. Continue pressing to cycle through the available
preset stations. You can store up to 10 preset stations.
• In iPod mode, press to go to the previous track, or press and hold to use fast back.
• In FM mode, press to go to the next lower radio frequency, or press more than one second
and release to search for a lower radio station.
• In iPod mode, press to go to the next track, or press and hold to use fast forward.
• In FM mode, press to go to the next higher radio frequency, or press more than one second
and release to search for a higher radio station.
Press to increase or decrease the clock radio volume.
Press while the alarm is sounding to turn the alarm o for 10 minutes. You can do this as many
times as you want.
To turn the alarm o until the next day, press any other button.
To turn the alarm o, press the Alarm button until there is no source displayed next to the
alarm icon on the display.
When the alarm is not sounding, press to cycle through the display brightness levels
(high>middle>low).
Note: When the clock radio is turned on, the LCD backlight defaults to High.
Press and hold to turn on your clock radio. Press and hold to turn o your clock radio.
When your clock radio is on, press to cycle through the sound sources (iPod, RADIO, AUX).
Extend the antenna to improve reception.
Press to set the time or sync the time with an iPhone. See Using the Time Sync function on the
right.
Plug the connector from an external sound source, such as an MP3 player, into this jack.
Plug the small connector from the AC adapter into this jack.
Features
Front view
Top view
Back view
Setting the time
1 Press and hold Clock/Sync for two seconds until the hour blinks on the
display.
2 Press Tune or to set the hour.
3 Press the Clock/Sync button again. The minutes blink on the display.
4 Press Tune or to set the minutes.
5 To nish setting the clock, press the Clock/Sync button again, or just
wait for ten seconds until the display returns to normal.
Using the Time Sync function
1 Place your iPod/iPhone in the docking station.
2 Press the Clock/Sync button. The clock radio syncs the time with the
iPod/iPhone automatically.
Note: The Time Sync function can be used with most of the iPod/iPhone
models, except some older models such as iPod mini, iPod 3G, and iPod 4G.
Selecting the mode (Source)
• Press SOURCE repeatedly to select iPod, Radio, or AUX. The source
you select appears on the display.
Setting the alarm
To set the alarm time:
1 Press the Alarm button to select the alarm music source
(Buzzer/Radio/iPod) or close the alarm.
If you select iPod, make sure your iPod/iPhone is placed in the dock. If
you select Radio, the alarm will be the last radio station you listened to.
2 Press and hold ALARM 1 or ALARM 2 until the hour digits blink.
3 Press Tune or to set the hour, then press the ALARM 1 or
ALARM 2 button. The minutes digits blink.
4 Press Tune or to set the minutes, then press ALARM 1 or
ALARM 2 to save the setting and exit the alarm setting mode.
To turn the alarm o:
1 When the alarm is sounding, press any key (except SNOOZE/DIMMER)
to turn o the alarm. The alarm is set for the next day.
2 If you do not want to set the alarm for the next day, press ALARM 1 or
ALARM 2 repeatedly until the alarm icons disappear from the display.
To use the snooze:
While the alarm is sounding, press SNOOZE/DIMMER. The SNOOZE
indicator appears in the display. The alarm turns on automatically ten
minutes later.
Notes:
If the alarm is set to Buzzer, the alarm volume gradually increases until it
reaches the maximum.
If the alarm is set to Radio or iPod, the volume starts from Volume 1 and
gradually increases to the volume level setting before the clock radio
was turned o.
The alarm sounds for 20 minutes and then shuts o automatically.
If two alarms are set, the rst alarm is stopped (set for the next day)
when the second alarm time is reached.