Filter
Top Products
12
NS-CLBT02 Digital Clock Radio with Bluetooth
www.insigniaproducts.com
2 If you want to use a different preset number, press or repeatedly
until the number you want appears on the LCD.
3 Within 10 seconds, press Pair/Preset again to save your station
preset. If you do not press Pair/Preset within 10 seconds, your
radio exits preset mode and your station preset is not saved.
Tuning to a preset radio station
After you program radio station presets, you can quickly tune to a preset
station.
To tune to a preset radio station:
• Quickly press and release press Pair/Preset one or more times
until the preset number for the station you want appears in the center
LCD. Your radio tunes to the station.
Adjusting the LCD brightness
When you adjust the LCD brightness, your radio retains the setting and
uses this setting the next time you turn on your radio.
To adjust the LCD brightness:
1 Quickly press repeatedly to select a brightness level. You can
select High, Middle, or Low.
2 Wait a few seconds to save your setting and exit brightness mode.
Playing audio from a Bluetooth device
You can pair your radio with a Bluetooth device to play the Bluetooth
audio through your radio’s speakers.
To pair your radio with a Bluetooth device:
1 Press (power) to turn on your radio, then press (source)
repeatedly until Bluetooth appears on the LCD.
2 Make sure that your Bluetooth device is turned on and within 33 feet
(10 meters) of your radio.
3 On the Bluetooth device, enter pairing mode. See the instructions that
came with your Bluetooth device for information about how to enter
pairing mode.
4 On your radio, press and hold Pair/Preset for six seconds. Your
radio enters pairing mode. Your radio remains in pairing mode for five
minutes or until your radio pairs with the Bluetooth device.
• If your Bluetooth device is not turned on or is too far away from
your radio, the icon on the LCD blinks every two seconds.
SNOOZE
DIMMER
SRC