Filter
Top Products
3
NS-C2112 AM/FM clock radio
www.Insignia-Products.com
Using your clock radio
Using the radio
To use the radio:
1 Press and hold the Power On/Band button for over one second to turn
on the radio. The power indicator turns on.
2 Adjust the volume by turning the Volume knob.
3 Select the band (AM/FM) by pressing the Power On/Band button. The
appropriate band (AM or FM) frequency indicator turns on.
4 Press the Power Off/Alarm Off button to turn off the radio.
Tuning the radio
To tune your radio automatically:
• Turn and hold the Up/Down knob for over 1 second. The radio searches
for the nearest AM/FM station.
To tune your radio manually:
• Turn the Up/Down knob. Each time you turn the knob, the frequency
changes by one step. Turn and hold the knob when searching for a
specific frequency.
STORING STATIONS IN MEMORY
You can store 20 radio stations (10 AM and 10 FM).
To select a stored station:
1 Select the band you want.
2 Press the Time Set/Memory button. The memory address (01 through
10) flashes.
3 Select the memory address you want by pressing the Time Set/Memory
button. The frequency is displayed.
To store a radio station:
1 Select the band and tune to the station.
2 Press the Store button. The memory address (01 through 10) flashes.
3 While the memory address flashes, turn the Up/Down knob to select the
memory address you want.
4 Press the Store button again to store the station in the selected memory
address. The radio displays the frequency.
Setting the clock
To set the clock:
1 When the radio is turned off, press the Time Set/Memory button. The
hour number flashes.
2 Turn the Up/Down knob to adjust the hour.
3 Press the Time set/Memory button again. The minute number flashes.
4 Turn the Up/Down knob to adjust the minute.
5 Press the Time set/Memory button again to confirm.
NS-C2112_FINAL2.fm Page 3 Thursday, March 9, 2006 7:23 PM