Filter
Top Products
Listening to an external audio source
1 Connect the external audio device to the AUX IN jack on the
back panel of your CD player.
2 Slide the FUNCTION selector on your
CD player to AUX.
3 Start playing music from your external audio device.
Audio plays through your CD player’s speakers.
Maintaining your CDs
• Handle CDs only by their edges. Never allow your ngers to
contact the re ective, unprinted side of the CD.
• Do not attach things such as adhesive tape and stickers to
your audio CDs.
• Periodically clean your CDs with a soft, lint-free, dry cloth.
Never use detergents or adhesive cleaners to clean the disc.
If necessary, use a CD cleaning kit.
• If the CD skips or gets stuck on a section of the disc, it is
probably dirty or damaged (scratched).
• When cleaning CDs, wipe in straight lines from the center of
the CD to the outside edge. Never wipe in circular motions.
Speci cations
Power AC: AC120V ~ 60Hz
Batteries: DC 12V (8 C batteries)
Radio frequency
coverage
FM: 87.5~108 MHz
AM (MW): 520~1730 KHz
GENERAL
CD PLAYER
Speaker: 8 ohms
Pick Up: 3-beam, semiconductor laser, 1-bit DA converter
Encoding: 8-time oversampling
Safety information
Warning: To reduce the risk of re or electric shock, do not expose this appliance
to rain or moisture.
This apparatus shall not be exposed to dripping or splashing, and no objects lled
with liquids, such as vases, shall be placed on the apparatus.
Speci cations
The lightning flash with
arrowhead symbol, within
an equilateral triangle , is
intended to alert the user to
the presence of unisulated
“dangerous voltage” within
the product’s enclosure
that may be of sufficient
magnitude to constitute a risk
of electric shock to people.
WARNING: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The exclamation point
within an equilateral
triangle is intended to alert
the user to the presence of
important operating and
maintenance (servicing)
instructions in the
literature accompanying
the appliance.
IMPORTANT SAFETY INSTRUCTIONS
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8 Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including ampli ers) that produce heat.
9 Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not t into
your outlet, consult an electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11 Only use attachments/accessories speci ed by the manufacturer.
12 Use only with the cart, stand, tripod, bracket, or table
speci ed by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
13 Unplug this apparatus during lightning storms or when unused for long periods of time.
14 Refer all servicing to quali ed service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15 Grounding or Polarization - This product may be equipped with a polarized
alternating current line plug (a plug having one blade wider than the other).
This plug will t into the power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try reversing the plug. If the
plug should still fail to t, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the polarized plug.
Alternate Warnings - This product is equipped with a three-wire grounding-type
plug, a plug having a third (grounding) pin. This plug will only t into a
grounding-type power outlet. This is a safety feature. If you are unable to insert
the plug into the outlet, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the grounding-type plug.
16 Ventilation - Slots and openings in the cabinet are provided for ventilation and
to ensure reliable operation of the product and to protect it from overheating,
and these openings must not be blocked or covered. The openings should never
be blocked by placing the product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or the manufacturer’s instructions
have been adhered to.
17 The power plug is used as the disconnect device and should remain readily
accessible during the device’s intended use. To completely disconnect the device
from power, you should disconnect the power plug from the AC power outlet.
18 The battery should not be exposed to excessive heat, such as direct sunlight, re,
or the like.
19 Cautions and other markings are located at the bottom of the apparatus.
20 The marking information is located at the bottom of apparatus.
Caution: The use of any controls, adjustments, or procedures other than those
speci ed herein may result in hazardous radiation exposure.
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this product is subject
to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply within the limits for a class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit di erent from that to which the
receiver is connected.
• Consult the dealer or an experienced technician for help.
FCC warning
Changes or modi cations not expressly approved by the party responsible for
compliance with the FCC Rules could void the user’s authority to operate this
equipment.
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.
90-day limited warranty
Visit www.insigniaproducts.com for details.
© 2010 BBY Solutions, Inc., All Rights Reserved.
ENGLISH 10-0166