Filter
Top Products
ALARM
Setting the Alarms
When the Alarm Sounds
1 Press and hold the AL1 (Alarm 1) or
AL2 (Alarm 2) button.
2 While holding the AL1 or AL2
button, press the HR/MIN buttons on
the top of the clock radio to adjust
the hour and the minute of the
alarm.
3 While continuing to hold the AL1
or AL2 button, press the SOURCE
button to adjust the alarm source.
Buzz - Wake to Buzzer
Tune FM - Wake to the FM radio
Tune AM - Wake to the AM radio
iPod - Wake to a docked iPod
4 Release the AL1 or AL2 button to
nish setting the alarm.
To cancel the alarm, press the AL1 or
AL2 button twice. The alarm source
icon on the display will disappear.
When the Alarm Sounds, you can either
turn the alarm o until the set alarm
time is reached again, or you can press
the SNOOZE button to delay the alarm
for an additional 9 minutes.
LCD Display After Alarms are Set
The above image shows alarm 1 set to sound
to the buzzer, and alarm 2 set to sound to a
docked iPod.
LCD Display During Setting of Alarm
The above image shows alarm 2 is being set to
sound to the AM radio. The time will blink dur-
ing the setting of the alarm.