Filter
Top Products
9
Tuning the AM/FM Radio
1. Press the Power Button to turn the unit on.
2. Press the Function Button to switch to unit to radio mode.
3. Press the Stop/Band Button to switch between AM and FM radio.
Extend and adjust the telescopic FM antenna to improve FM reception.
An AM antenna is built-in to the unit. Adjust the position of the unit to improve AM
reception.
4. Press the Skip/Search Buttons to tune the radio.
Saving a Radio Station to the Unit’s Memory
1. Press the Power Button to turn the unit on.
2. Press the Function Button to switch to unit to radio mode.
3. Press the Stop/Band Button to switch between AM and FM radio.
4. Press the Skip/Search Buttons to tune the radio.
5. Press and hold the Mem/Clk Adj Button to begin saving the current radio station.
6. Press the Skip/Search Buttons to select a memory slot for the current radio
station.
Choose from “P01” to “P10”.
7. Press the Mem/Clk Adj Button to conrm the selected memory slot.
8. Press the Play/Pause/Mem-Up Button and Repeat/M-Dn Button to cycle
through the saved radio stations.
Using the Auxiliary Input
1. Plug one end of a 3.5 mm mini-phono cable (not included) or a 3.5 mm mini-
phono to RCA cable (not included) into the Aux Input on the unit.
2. Plug the other end of the cable into the audio output/headphone output on an Mp3
Player or Other Audio Source.
3. Press the Power Button to turn the unit on.
4. Press the Function Button to switch the unit to aux mode.
5. Audio played from the Mp3 Player or Other Audio Source will now be heard on
the unit.
If connecting to the headphone output of an audio source, the source’s volume
controls may need to be adjusted for optimal sound.
IB318B-IB-03-04.indd 9 3/4/2008 10:57:27 AM