iHome ZN9 Clock Radio User Manual


 
ZN9 IB_0521_b.fh10 6/11/08 1:24 PM Page 3
quick start
Attach AC adaptor cable to
DC jack on back of the ZN9 and
plug the other end into a
wall socket.
Snap AM antenna into stand,
then plug antenna cable into
socket on back of ZN9. Move
antenna 12” away.
Press the Radio button and
press again to select AM/FM
band. Turn the Set Wheel to
tune in a station. See page 4
for programming presets.
Insert a Zune into the dock
with proper insert (Zune must
not be in a skin or case). The
Zune will charge while docked.
Press the
Button on the ZN9
to play your Zune.
• Move the DST switch on back
of unit to +1 or -1 (adds or
subtracts an hour)
• Press & hold the Time Zone
button on back until the
display flashes
• Turn the Set Wheel to select
your time zone
• Press the Time Zone
button again.
1
4:time 5:Zune
4GB/8GB 30GBUse this insert
For this Zune
80GB
Zune 4GB & 8GB Zune 30GBZune 80GB
2:antenna
3:inserts
1:power
6:radio
Select the dock insert for your
Zune model from the table below
and place insert in dock. Slide the
Zune connector to left or right to
match proper insert if necessary.
Never dock a Zune without an
insert in place.
Zune
connector