Filter
Top Products
5
Troubleshooting
Unit doesn’t respond (no power)
• Check that all connections are correct and properly plugged in. If operating on batteries, make sure
batteries are fresh and are properly installed.
Unit doesn’t charge my device
• Make sure the unit is connected to working AC power outlet. Unit will not charge devices while
operating on batteries.
• USB port will NOT charge iPad models
Resetting the unit
If the unit does not respond properly or appears to be “frozen”, you may wish to try resetting it. To
do so, disconnect unit from AC power, remove all batteries and let the unit sit for a few minutes
before replacing the batteries and reconnecting to AC power.
Using with iHome+Apps
• Apps will not work when operating on batteries
• Alarm app will wake to last connection (USB port or 30-pin dock) a device was PLAYED through,
not the last connection docked to.
For further information and to see the latest instructions,visit www.ihomeaudio.com/support
Battery Warning
For models that require more than one battery
• Do not mix with used or other battery types/brands
• Replace all batteries at the same time
• Do not open batteries
• Do not dispose of in fire
• Do not heat above 75ºC (167ºF)
• Do not expose contents to water
• Do not charge or recharge
• Do not install backwards