Filter
Top Products
iD9
Using the
Using the Line-in Jack
The iD9 has an aux line-in jack located on the back of the unit for listening to
any audio device equipped with a headphone or line-out jack.
Note: Do not connect a device to the line-in jack while an iPad, iPhone or
iPod is docked or you will hear both sources playing at once.
1. Plug one end of a standard 3.5mm audio cable into the headphone jack
or line-out jack of your device and the other end into the line-in jack on the
iD9.
2. Press the Power Button on the iD9.
3. Use the play control on your device. Adjust the volume to the desired
listening level with the – / + Volume Button. You may need to adjust the
level on your audio device, too. NOTE: To save battery power, this unit
has lower volume output when operating on the internal battery.
4. When you are done listening, press the Power Button to turn off the unit.
Remember to turn off the power on your audio device, too.
6
P10