Filter
Top Products
Pairing with a Different Device
When you power ON the unit, it will automatically link with the previously paired Bluetooth device as
long as that device is still within range (about 30 feet).
Playing Audio Via Bluetooth
1. Press the Power Button to turn on the unit in the last active mode. If needed, press the
Button to enter Bluetooth mode. The blue light on the Bluetooth Button will flash and a tone will sound
as the unit searches for a previously paired device, and then turn solid blue once a previously paired
device is detected.
2. Press the Play Pause Button on the unit to play audio from your linked Bluetooth device. While
audio is playing, press to pause play, and again to resume play.
3. Use the controls on your device to navigate tracks, etc.
4. Turn the Volume Knob to control the system volume. Adjust EQ settings as desired.
NOTE: The volume ranges from 0 - 40. While the dial can still be turned when these limits are
reached, doing so has no effect.
5. When done listening, press the Power Button to turn the unit off. Remember to turn off your audio
device, too.
TIP: In Bluetooth mode, turn the Tuning Knob to adjust the brightness on the display. Note that the tuning
knob can continue turning even when the brightest or dimmest (off) settings have been reached.
6
iBT44
Using the
P10