quick start
Attach AC adaptor cable to DC
jack on back of the unit and plug
the other end into a wall socket.
Uncoil AM antenna cable from
antenna frame and plug cable into
socket on back of unit. Hold base of
AM antenna in one hand and bend
the outer frame around towards the
base and snap tabs into open slot
on base. Move antenna 12” away.
Extend FM antenna.
Dock your iPhone or iPod (see step
4). Press and release the Time
Sync Button located on back of
the unit. “TIME SYNC” will appear
on the display, followed by “TIME
UPDATED” upon successful
syncing.
1
5: time sync4: iPhone/
iPod
Gently dock an iPhone or iPod into
dock with proper insert (iPhone/iPod
must not be in a skin or case). The
iPhone/iPod will charge while
docked. Press and release the
Button to play your iPhone/iPod.
Press and release the Mode
Button as needed to select
AM/FM band. Press and release
the + or - Button to tune in a
station. See page 6 for program-
ming presets.
1: power
Select the dock insert for your
iPhone/iPod model from the
table below and place insert in
dock. To remove insert, place
thumbnail in slot and gently pull
upwards.
NOTE: Inserts provide the best stability for your iPhone
or iPod. If you do not have an insert for your iPhone/iPod,
you can safely dock it provided you always do so gently
and carefully. To purchse an insert visit
www.ihomeaudio.com or call iHome toll free at
1-877-446-6301 to purchase one.
3: inserts
RESET
RESET
TEST
TEST
6: radio
Use this insert
For this iPhone / iPod
iPhone 4
insert 19
iPhone 4
iPod touch 2G
insert 16
iPod touch 2G/3G
nano 6G/touch 4G
insert 20
nano 6G
iPod touch 4G
2: antennas
Tab
Slot